Active Member
|
[China]
Address: Building 22#, the 7th Floor, Chuangye Industrial Area, Shapuwei Community, Songgang Sub-district, Bao'an, Shenzhen, China
Contact name:sylvia
Shenzhen JiDing Technology Co., Ltd |
|
|
CE Mold Temperature Controller Configured With Water Softener Injection Production
Mold Temperature Controller Configured with water softener
In an ordinary injection workshop : tap water is general circulating media in workshop .tap water is rich in calcium , magnesium and other minerals and organic matter . if rapid heating and cooling equipment directly uses circulating tap water directly , When heating pipes temperture raise to more than 120 ℃ , calcium , magnesium and other minerals and organic matter are easy to adhere on heating pipe surface and become sediment , it is easy to burn out and lead to equipment failure , and pause production .
magnesium ions in the water could be reduce to tolorance range
Calcium in the water could be be reduce to tolorance range
Can prevent mold waterways from getting rust and blocking
Rapid heating and cooling injection technology features and advantages
1. Eliminate welding line , Shrinkage mark and flow mark.
2. Enhance the gloss on the surface of parts , so as to achieve mirror , high-black and high gloss effect , completely solve the plastic part shrinkage issue.
3. Improve the tensile , compressive strength and surface anti-scratch performance.
4. Reduce subsequent processing procedures(such as painting and electroplating) increase yield by 20-30%
5. Eliminate floating fiber surface of glass fiber parts. Thin wall forming can improve of molding fluidity . Improve product quality and strength ,and reduce the injection cycle of thick wall moulding by more than 40%.
6. For electroplate parts, it can improve part mirror effect, eliminate the welding lines , reduce the crack mark of parts to be plated and the defective rate of plating production.
7. Eliminate parts stress mark, release internal stress of parts , improve rib marks of texture parts .
8. Reduce injection pressure and prolong injection machine's lifespan.
9. Eliminate hot runner mark and make injection part more perfect
