Watt-hour Meter Calibrator , Electric Energy Meter Calibrating
Tester , Power Meter Calibrator
I. Product Description:
The calibrating set is special for calibrating test to
- Measurement of electrical meter parameters such as three-phase
current, voltage, active power, reactive power, power factor,
angle, frequency etc.
- On-site verification of many electrical meter like three-phase
active and reactive power inductive, electronic energy meter etc.
- On-site calibration of integrated error of metering device.
II. Application filed
- Power bureau running inspection department,
- Watt-hour Meter /Electric Energy Meter manufacturers,
- Calibrating measurement centers
III. Features
- Measurement of electrical parameters such as three-phase current,
voltage, active power, reactive power, power factor, angle,
frequency etc.
- On-site verification of many electrical instruments like
three-phase active and reactive power inductive, electronic energy
meter etc.
- On-site calibration of integrated error of metering device.
- Voltage input of 0-400V auto-switching range, to ensure accuracy.
- Two ways for current input: terminals or clamp meter, the maximum
measurable current of 500A.
- Real-time display, instantly identify wiring errors, stealing
behavior is under control.
- CT ratio measurement.
- Store measured data of 200 meters.
- Equipped with computer through RS232 serial port on the device for
the data management, real paperless office.
- Large LCD display, clear, easy to operate.
- Supply both from the power outlet (AC 220V) and from the grid (AC
80-400V), fully consider the site conditions of use.
- Equipped with three-phase testing power, as the three-phase test
devices.
- Strong ability to adapt to live load, stable and reliable.
- Small size, light weight, beautiful appearance, easy to carry.
IV. Technical data
Electric energy measurement | 0.1-grade,0.2-grade | Working power | External power:AC 220V±10% or Ua supply:AC 80-400V |
AC voltage measurement | (0V-400V)0.1 -grade, 0.2 -grade |
AC current measurement | 0.1 -grade,0.2 -grade | Overall power consumption | 10 VA |
Active power | 0.2 -grade, 0.3 -grade | Operating temperature | -10℃—50℃ |
Reactive power | 0.3 -grade, 0.5 -grade | Relative humidity | 40%—90% |
Frequency measurement | 45Hz-65Hz (±0.05Hz) | Warm up time | About 10 min |
Angle measurement | 0°-360°(±0.3°) | Weight | 5 Kg |
Pulse constant | FL=3600P∕kw·h FH=3.6×107P∕kw·h | Dimension | 457×287×170 mm |
V. Accessories:
- Instruction manual 1 copy
- Factory report 1 copy
- Service card 1 copy
- Test lead wire 1 set
- Optical sampler 1 piece
- Pulse sampling line 1 piece
- Line of communication 1 piece
- 5A Clamp meter 3 pieces
- Software CD 1 copy
- Power line 1 piece
- 2A protective tube 2 pieces
- Wiring bag 1 piece