Active Member
|
[China]
Address: Hutang Science and Technology Industrial Park, East Radio and Television Road, Wujin District, Changzhou City
Contact name:Grace Yang
Changzhou Daye Energy Technology Co., Ltd. |
|
|
oxy hydrogen generator cutting machine hho generator for cutting dy6000
We are the only manufacturer who provide the Text display with Auto-voice
playing.And it also can automatically adjust the programme according to the
conditions of the machine.
| Model | DY6000 |
| In put Voltage | 380V three phases |
| Rated Power(KW) | 21kw |
| Working Pressure(Mpa) | ≤0.2 |
| Gas Output ±10% | 0-6000L/H |
| Water Consumption(L/h) | 3 L/h |
| Cooling Model | Air cooling |
| Water Supply Mode | Auto |
| Cutting thickness mm | 120 |
| Ambient temperature℃ | 0-40 |
| Dimension-L*W*H (mm) | 1350*850*1710MM |
| Weight | 550kg |
Hydrogen oxygen machine is through electrolysis of water, hydrogen and oxygen extraction from water energy equipment, hydrogen as a fuel, oxygen for combustion, can replace acetylene, gas, liquefied gas and other carbon-containing gases, with safety, high efficiency, environmental protection, energy saving features.
Electrolytic power supply will ac (380V or 220V) rectifier into direct current, applied to both ends of the electrolytic cell, electrolytic cell electrolyte (25% potassium hydroxide solution) by direct current action, electrochemical reaction, produce hydrogen in the cathode, produce oxygen in the anode.
As a kind of green energy, hydrogen can meet the requirements of resources, environment and sustainable development at the same time, which cannot be compared with other gas. In the cutting process, hydrogen and oxygen are non-toxic and will not harm human health, no waste discharge, no pollution of the environment, in line with the requirements of environmental protection and health safety production.
Advantages of HHO cutting machine
1) the production process of HHO gas is pollution-free. The product
of brown gas combustion is water, non-toxic,
tasteless and smokeless
2) hydrogen and oxygen gas is produced and used immediately without
storage, which is safer than gas cylinder.
3) HHO flame concentration, narrow slit, material saving, fast
preheating, small thermal impact area, high cutting
precision, smooth cutting surface, no slag hanging.
4) HHO cutting does not require low-pressure oxygen, and the
cutting speed is easy to control, which can save 20%
oxygen and 40% gas cost compared with acetylene
(the oxygen produced by electrolysis can meet the demand of
hydrogen combustion, so there is no need to consume
mixed oxygen, which can save a lot of mixed oxygen cost)
Comparison of cutting effect between hydrogen and propane
acetylene and coke oven gasThe flame temperature of hydrogen is about 2800℃, propane (2700℃) and acetylene (3300℃).
The high flame temperature of hydrogen can ensure the oxidation reaction temperature and fast cutting speed of billet at cutting point. In the actual cutting process, the cutting speed of hydrogen gas is more than 30% higher than that of coke oven gas, and stepless speed regulation can be realized. And more importantly, the hydrogen flame is straight. By observing and analyzing the cutting sections of several kinds of gas, it can be found that the cutting sections are smooth and smooth without concave and convex when hydrogen is used. The surface is basically free of slag, which saves cleaning and post-processing time, and ensures that the cut materials are not carbon.
