JMY5051 is the second generation product based on JMY505 with UART
and IIC serial port. JMY5051 has various functions and supports
multi ISO/IEC standard of contactless card. The RF protocol is
complex. The designer combined some frequent used command of RF
card and then user could operate the cards with full function by
sending simple command to the module.
The impedance between RF module and antenna was tuned by impedance
analyzer. And then the module has excellent performance and
stability.
The module and antenna is split design. They are connecting by a
50ohm coaxial wire whose length is up to 1000cm in good situation.
But the best length of the coaxial line is 60cm.
1. Qualifications
- • PCD model: NXP CL RC663
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B, ISO15693,NFCIP-1, NFCIP-2
- • Anti collision ability: Full function anti collision; be able to
process multi-cards; be able to set operate single card only.
- • Auto detecting card: Supported, default OFF. The default state
can be set.
- • Power supply: DC 5V (±0.5V)
- • Interface: IIC & UART (selected by SPS pin, recommend to use
IIC)
- • Communication rate:
- IIC: Max.200Kbps
- UART: 19200bps / 9600bps / 38400bps / 57600bps / 115200bps
- • Max.command length:
- JCP02 252 Bytes;
- JCP03 510 Bytes;
- JCP04 253 Bytes;
- JCP05 510 Bytes;
- • Interface level: 3.3V (TTL level; 5V tolerance)
- • Power consumption: 130mA
- • Operating distance: 100mm (depending on card and antenna design)
- • Dimension: 42mm*21mm*8mm
- • Weight: About 15g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
2. Physical Parameter
- • Dimension
3. Pin configurations and Pin outs
4. Connection schematic
5. Antennas
-
Normally, as the size of TX500 series antenna may not meet the
actual demands, the antenna needs to be customized,
especially in some compact systems. The following information for
customization is needed:
1. Dimension of the antenna PCB;
2. the position and direction of the antenna outlet and the
connector;
3. the description of the antenna periphery. JINMUYU will design
the most proper antenna according to the user’s
exact requirements.
We provide many models of antenna. There are some recommended
models in the table
- 6. Module Function Configuration Table
| JMY5051 |
PCD | RC663 |
JCP02 Communication Protocol | ● |
JCP03 Communication Protocol | ● |
JCP04 Communication Protocol | ● |
JCP05 Communication Protocol | ● |
| |
MIFARE 1K | ● |
MIFARE 4K | ● |
MIFARE Ultra Light | ● |
MIFARE Ultra Light C | ● |
MIFARE Mini | ● |
MIFARE DESfire (Step Commands) | ● |
MIFARE Plus | ● |
T=CL TYPE A | ● |
SR176 | ● |
SRI512 | ● |
SRI1K | ● |
SRI2K | ● |
SRI4K | ● |
SRIX4K | ● |
T=CL TYPE B | ● |
I.CODE 1 | ● |
I.CODE SLI | ● |
I.CODE SLI-S | ● |
TI Tag-it Series | ● |
ST LRI Series | ● |
NFC Active Initiator | - |
NFC Active Target | - |
NFC Passive Initiator | ● |
NFC Passive Target | - |
NFC Card | - |
- 7. Communication Protocols
- The physical interfaces of
module are various. But the data link layer protocols are in
accordance with JCP02, JCP03, JCP04
and JCP05. Please reference
"JMY600 Series IC Card Module General Technical Manual".For convenience to test the Module, we supply PC software:
TransPort to users.
We have interface program source code to help users also. They are
KELL projects in C51 or ASM51 format.
Please log in our website: www.jinmuyu.com to download or mail to
lilly.tsheng@jinmuyu.com to obtain the resources.