HESLY HexMesh & Anchor Factory - a brand of Hesly Metal Mesh Group Limited |
|
Hexmetal is a hexagon shaped grid used in the installation of thick linings. Hexmetal supports the lining and prevents slumps. It retards erosion, corrosion, cracking, blistering, pitting or collapse thereby lengthening the life of the lining. Hexmetal is recommended for use when placement is spaced from the steel shell to allow room for thick insulation between the steel shell and the armored surface. The slots permit passage of the castable which forms a key between adjacent cells. Available in standard and lance pattern.
FOR REFRACTORIES
The flexibility, high strength and erosion resistant
characteristics of Hexmesh make it an excellent choice for
refractory linings in furnaces, reactors, cyclones, ducts and
flues.
FOR FLOORS
Hexmetal provides long term protection for armor applications inside
industrial floors. Specifically, loading docks, ramps, high traffic
aisles for forklifts and trucks. Hot floors for foundries, forge
shops and steel mills. Refuse and recycle disposal plant floors and
almost anywhere floors are subject to severe impact and rolling
loads. All will benefit with Hexmesh
Hot gaseous substances cannot erode the refractory because they are reflected away from the surface by the metal honeycomb- shaped grid.
The flexibility of HESLY’s Hexmetal allows it to be rolled, and easily conforms to circular
shapes. It is recommended for use when placement is spaced from the
steel shell to allow room for thick insulation between the metal
shell and the armoured surface.
Features of HEXMESH
|
|
|
|
|
|
The main style of HESLY Hex Mesh
Hexsteel: Bonding Hole Type Instead of lance tabs, holes are punched through the walls of the hexmetal cell. Refractory can then flow through these holes to achieve a bond from one cell to another. | Hex-metal: Pronges/Lances Type this style has lance tabs protruding from the walls of the hexagonal cell to act as anchorage for the refractory.
|
Hex mesh is flexible and easily conforms to circular shapes, which allows it to be rolled. It is ideal for lining ducts, furnaces, reactor vessels, cyclones, flue gas lines and other high temperature equipment of virtually any shape or configuration.
Hex steel is put to use in many industries including power plants, chemical industry, cement plants, steel, petroleum, power generation and other large devices. Hex material can largely improve the heat erosion and abrasion resistance.
Anchorage Material | Chemical Composition | Typical Service Temperature | ||||||||
AISI | DIN | C% | Si% | Mn% | P% | S% | Cr% | Ni% | others | |
304 | 1.4301 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.45 | ≤0.30 | 18.0—20.0 | 8.0—10.0 | N | 800℃ |
316 | 1.4401/1.4436 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 16.0—18.0 | 10.0—14.0 | N:Mo | 800℃ |
321 | 1.4541 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.45 | ≤0.30 | 17.0—19.0 | 9.0—12.0 | Ti | 800℃ |
310S | 1.4845 | ≤0.08 | ≤1.50 | ≤2.00 | ≤0.45 | ≤0.30 | 24.0—26.0 | 19.0—22.0 | — | 1150℃ |
Inconel 601 | 2.4851 | ≤0.10 | ≤0.50 | ≤1.00 | — | ≤0.15 | 21.0—25.0 | 58.0—63.0 | Al:Cu | 1200℃ |
Inconel 800 | 1.4876 | ≤0.10 | ≤1.00 | ≤1.50 | ≤0.45 | ≤0.15 | 19.0—23.0 | 30.0—35.0 | Al:Ti | 1200℃ |
410S | 1.4001 | ≤0.08 | ≤1.00 | ≤1.00 | ≤0.40 | ≤0.30 | 11.5—13.5 | ≤0.60 | — | 750℃ |
CARBON STEEL | VARIOUS | 550℃ |
ITEM | SPECS | B | A | AF | |
1 | 1.2 X 10 X 50mm | 1.2mm | 10mm | 40mm | |
2 | 1.2 X 15 X 50mm | 1.2mm | 15mm | 50mm | |
3 | 1.2 X 20 X 50mm | 1.2mm | 20mm | 50mm | |
4 | 1.5 X 10 X 50mm | 1.5mm | 10mm | 50mm | |
5 | 1.5 X 15 X 50mm | 1.5mm | 15mm | 50mm | |
6 | 1.5 X 20 X 50mm | 1.5mm | 20mm | 50mm | |
7 | 1.8 X 15 X 50mm | 1.8mm | 15mm | 50mm | |
8 | 1.8 X 20 X 50mm | 1.8mm | 20mm | 50mm | |
9 | 1.8 X 25 X 50mm | 1.8mm | 25mm | 50mm | |
10 | 2.0 X 15 X 50mm | 2.0mm | 15mm | 50mm | |
11 | 2.0 X 20 X 50mm | 2.0mm | 20mm | 50mm | |
12 | 2.0 X 25 X 50mm | 2.0mm | 25mm | 50mm | |
13 | 2.0 X 30 X 50mm | 2.0mm | 30mm | 50mm | |
14 | 2.0 X 30 X 80mm | 2.0mm | 30mm | 80mm | |
Remark | A/F | Min: 40mm Max: 100mm | |||
MATERIAL | A3 ,0Cr13,1Cr13,SS304,SS316,1Cr18Ni9Ti,SS310S |
Carbon Steel Hex Mesh | 410S Hexmesh China Factory |
HESLY HexMesh | HESLY Hexmetal |
Hexsteel Refractory Linings | Hex Steel Mesh China Factory |
Package and Delivery
| |
China Hexmesh Factory | China Hexmetal Exporter |
HESLY CHINA HEXMESH & ANCHORS FACTORY | |
+86 188 3181 6606 (whatsapp/wechat) | |
+86-318-7888900 | |
+86-318-7963989 | |
info@hesly-group.com | |
www.hex-mesh.com |