|
[China]
Trade Verify
Address: Qinxin Industrial Zone, Yaoguan Town, Wujin District, Changzhou City, Jiangsu Province, China
Contact name:Nora
Changzhou Hetai Motor And Electric Appliance Co., Ltd. |
|
Verified Suppliers
|
|
|
Gearbox Nema 11 28 BYGH Stepper Motor 4.22 V 1.8 Degree Micro High Quality With ROHS
The 28BYGH Stepper Motor is made of 32MM-51MM silicon steel sheet and rare earth magnetic steel. The air gap is small and the torque is large. It has the advantages of high anti-resonance characteristics and low heat generation.
Another reason to use a gearbox with a stepper motor is to increase the torque available to drive the load. When the load is driven by a motor-gearbox combination, the gearbox multiplies the torque from the motor by an amount proportional to the gear ratio and the efficiency of the gearbox.
Electrical Specification
| STEP ANGLE | °/STEP | 1.8 |
| RATED VOLTAGE | V | 4.22 |
| CURRENT | A/PHASE | 0.67 |
| RESISTANCE | Ω/PHASE | 6.3 |
| INDUCTANCE | mH/PHASE | 3.2 |
| HOLDING TORQUE | g.cm | 600 |
| INSULATION CLASS | B | |
*Products can be customized by special request.
Wiring Diagram
| ELECTRICAL CONNECTION TABLE | ||
| FUNCTION | COLOR | |
| +5V | RED | UL1007 26AWG |
| HALL A | GREEN | |
| HALL B | BLUE | |
| HALL C | WHITE | |
| GND | BLACK | |
| PHASE A | ORANGE | |
| PHASE B | YELLOW | |
| PHASE C | BROWN | |
GEARBOX Electrical Specification
Out diameter 28mm Powder metallurgy
| Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
| Powder metallurgy | sleeve bearings | ≤80 | ≤30 | ≤200 | ≤0.03 | ≤0.4 | ≤1.5 |
| Planetary gearbox 28 square type | ||||||
| Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length L (mm) | Weight(g) | Number of gear trains |
| 1/3 | 0.2 | 0.6 | 81% | 28.5 | 105 | 1 |
| 1/6 | ||||||
| Planetary gearbox 28 round type | ||||||
| Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length L (mm) | Weight(g) | Number of gear trains |
| 1/14 | 0.5 | 1.5 | 72% | 29.8 | 92 | 1 |
| 1/30 | ||||||
| 1/64 | 1.8 | 5 | 65% | 40 | 105 | 1 |
| 1/107 | ||||||
Hetai Production Process
Certificate
 |  |  |
Stepper motor ROHS report Date: June 09, 2021 | BLDC Motor ROHS report Date: June 09, 2021 | CE cetificate |
 |  |
IATF 16949: 2016 Valid until: 02 June 2024 | ISO 9001: 2015 Valid until: 02 June 2024 |
QUALITY CONTROL PROCESS
| Incoming Inspection | ||
 | ||
| Measure Diameter | Measure Length | Measure Hardness |
| Stator Inspection | ||
 |
| Measure Height | Measure Resistance | Test Waveform | Test phase | Test withstand voltage |
| Rotor Inspection | ||||
 | ||||
| Rotor Positioning | Measure core thickness | Measure Rotor shaft length | Check motor misalignment
| Measure the outer circle |
Market Range
FAQ
1.Are you factory?
