herong electric |
Verified Suppliers
|
|
The VS2 outdoor pole-mounted vacuum circuit breaker adopts a
three-phase common box structure as a whole. The permanent magnet
operating mechanism and the pole pole are directly connected up and
down, and fixed by the box. The three form a sealed space, similar
to an indoor environment. The structure is simple and bright, the
design accuracy is high, and the installation is convenient. It can
meet the requirements of the arc extinguishing chamber distance and
overtravel without adjustment. VS2 type circuit breaker adopts cast
aluminum alloy box, which is beautiful and generous. At the same
time, it is equipped with a manual opening device. Three aviation
sockets are installed at the bottom of the circuit breaker for
connecting with external signals. Fully meet the different needs of
users.
The Vs2 vacuum circuit breaker is equipped with an isolating switch
solution. When the isolating switch is open, there is an obvious
visible fracture, and it has an anti-misoperation interlock with
the circuit breaker body, which makes the circuit breaker
convenient and safe to maintain.
Lightweight, flexible, safe and trustworthy circuit breaker three-phase common box structure, beautiful and generous cast aluminum alloy box, truly permanent, maintenance-free, excellent performance permanent magnet operating mechanism set solid sealing pole, permanent magnet mechanism , Current transformer and isolating switch in one circuit breaker, integrated solid-sealed poles fundamentally solve the environmental tolerance problem of the circuit breaker, the design of integrated solid-sealed poles is convenient for later transformation and expansion. Equipped with iSM2 intelligent controller , Make the operation and control of the circuit breaker humanized, safe and easy to use.
VS2 outdoor pole-mounted vacuum circuit breaker is a three-phase AC
50Hz, rated voltage of 12kV outdoor power distribution equipment.
Mainly used for breaking and closing the load current, overload
current and short circuit current in the power system. It is
suitable for protection and control in substations and power
distribution systems of industrial and mining enterprises, and is
especially suitable for places with frequent operation of urban and
rural power grids.