DDZY88-2 single-phase cost-controlled smart watt-hour meter
(remote-switch internal/external)
I.Overview
DDZY88 single-phase cost-controlled smart energy meter
(remote-switch internal/external), using advanced solid-state
integrated circuit technology and SMT technology, is suitable for
measuring AC single-phase active energy with a frequency of 50Hz,
and its performance complies with GB/T 17215.321- 2008 technical
requirements. This product has a two-way metering function, which
can accurately measure the active energy in the positive and
negative directions, and can set the combined active energy
according to this, with the time-sharing measurement function; the
active energy is divided into peaks, peaks, flats, valleys, etc.
Time period electric energy and total electric energy are
respectively accumulated and stored. It has LCD display function
(with button wake-up LCD display function when power is off), RS485
and infrared communication function, the realization of the cost
control function is remote mode, and the load switch is divided
into two modes: built-in and external.
The main function
1. Support 4 rates, 14 time zones throughout the year, 14 time
periods can be set every day, two sets of rate timetable switching,
and special timetable settings for holidays.
2. Supports the function of tiered electricity, does not support
tiered electricity price, and requires background settlement.
3. Support the reset function under the key and permission
conditions. The bottom value of the electric energy meter can only
be reset to zero, and setting is prohibited.
4. Support data storage function, which can store two-way total
electric energy and electric energy data of various tariffs for the
last 12 settlement days.
5. Support freezing function, with time freezing, instantaneous
freezing, daily freezing, agreed freezing, and whole point
freezing.
6. Support event recording function, can record the total number of
power failures, the total number of programming, the total number
of time calibration, the total number of open meter cover, pull and
close events; can permanently record the time of the electric meter
reset event and the time of reset The electrical energy data.
7. Support cost control function, which can be realized remotely
through virtual media such as RS485 and remote power sales system,
and through virtual media to set power parameters in the electric
energy meter, pull and close commands, and alarm instructions, by
the electric energy meter An alarm signal is issued to remind users
to pay for electricity.
8. Support alarm function, with light alarm output. The light alarm
uses a red constant light indicator, and the alarm automatically
ends when the event returns to normal.
9. Support functions such as security authentication. When setting
parameters and issuing remote control commands for the electric
energy meter through virtual media, strict ESAM module security
authentication is required to ensure safe and reliable data
transmission.
II.The main parameters
1. Accuracy: Level 1, Level 2.
2. Rated voltage (Un): 220V, limit working voltage: 0.7Un~1.2Un.
3. Current specifications: 5(60)A, 10(100)A.
4. Basic error, starting and creeping: meet the requirements of
GB/T 17215.321-2008.
5. Dimensions: 160mm x 112mm x 58mm.
6. Installation size: 140 (150) mm x 100mm.
7. The communication protocol complies with: DL/T 645-2007
"Communication Protocol for Multifunctional Energy Meters" and its
filing documents.
8. The rate function complies with: DL/T 614-2007 protocol
requirements.
9. The basic functions comply with: Q GDW 354-2013 functional
specifications for smart energy meters.
10. The external dimensions conform to: Q GDW 355-2013 single-phase
intelligent electric energy meter type specification.
11. The technical parameters comply with: Q GDW 364-2013 technical
specifications for single-phase smart energy meters.
12. Safety certification complies with: Q GDW 365-2013 Smart Energy
Meter Information Exchange Safety Certification Technical
Specifications
.