Anping County Hengyou Wire mesh Products Co., Ltd |
|
Description
The thickness of rib lath common goes 0.3mm,0.4mm,0.45mm,0.5mm
The rid height is 1/8''(3.2mm),3/8''(9.6mm),4mm,10mm,or3/4''
Model | Thickness (mm) | Weight (kg) | Width (mm) | Length (mm) | Rib Height (mm) | Rib Distance(mm) |
021 | 0.21 | 1.70 | 450 | 2200 | 14-20 | 90 |
023 | 0.23 | 1.90 | 450 | 2200 | 14-20 | 90 |
030 | 0.30 | 2.48 | 450 | 2200 | 14-20 | 90 |
035 | 0.35 | 2.90 | 450 | 2200 | 14-20 | 90 |
040 | 0.40 | 3.30 | 450 | 2200 | 14-20 | 90 |
045 | 0.45 | 3.70 | 450 | 2200 | 14-20 | 90 |
050 | 0.50 | 4.10 | 450 | 2200 | 14-20 |
Sheet size: 27'' x 96'' 27'' x 84''
Finish | Wt.per Sq.Yd. | Sheet Size | Pes/Bdl | Yds/Bdl | Yds/Pallet | |
Galv. | 3.4 lbs | 27" ×96" | 10 | 20 | 1000 | |
M.T=Material Thickness; SW ×LW=Size of opening; R.H=Rib Height; R.D=Rib Distande | ||||||
Model | M.T/mm | SW ×LW/mm | R.H/mm | R.D/mm | Wt /Kg/m² | Sheet |
JC- Rib Lath-001 | 0.30 | 12×8 | 5 | 100 | 1.2 | 610 |
JC- Rib Lath-002 | 0.35 | 12×8 | 5 | 100 | 1.4 | 610 |
JC- Rib Lath-003 | 0.40 | 12×8 | 5 | 100 | 1.6 | 610 |
JC- Rib Lath-004 | 0.30 | 16×11 | 8 | 150 | 0.88 | 610 |
JC- Rib Lath-005 | 0.35 | 16×11 | 8 | 150 | 1.18 | 610 |
JC- Rib Lath-006 | 0.40 | 16×11 | 8 | 150 | 1.46 | 610 |
Most Popular
Thickness(mm) | Rib Distance(mm) | Weight(KG) | Width X length(mm) |
0.30 | 100 | 1.79 | 610 x 2440 |
0.35 | 100 | 2.09 | 610 x 2440 |
0.40 | 100 | 2.38 | 610 x 2440 |
0.45 | 100 | 2.68 | 610 x 2440 |
0.5 | 100 | 2.98 | 610 x 2440 |
Thickness (mm) | Sw×Lw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.30 | 12×8 | 5 | 100 | 1.2 |
0.35 | 12×8 | 5 | 100 | 1.4 |
0.40 | 12×8 | 5 | 100 | 1.6 |
0.30 | 12×8 | 8 | 100 | 1.2 |
0.35 | 12×8 | 8 | 100 | 1.4 |
0.40 | 12×8 | 8 | 100 | 1.6 |
Thickness (mm) | Sw×Lw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.30 | 3.5×13 | 4 | 60 | 1.27 |
0.35 | 3.5×13 | 4 | 60 | 1.49 |
0.40 | 3.5×13 | 4 | 60 | 1.70 |
0.30 | 3.5×13 | 4 | 75 | 1.27 |
0.35 | 3.5×13 | 4 | 75 | 1.49 |
0.40 | 3.5×13 | 4 | 75 | 1.70 |
Thickness (mm) | SwxLw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.35 | 20x9 | 8 | 75 | 1.00 |
0.40 | 20x9 | 8 | 75 | 1.13 |
0.45 | 20x9 | 8 | 75 | 1.27 |
Thickness (mm) | SwXLw (mm) | Rib Height (mm) | Rib Distance mm | Weight kg/m2 |
0.30 | 16x11 | 8 | 150 | 0.88 |
0.35 | 16x11 | 8 | 150 | 1.18 |
0.40 | 16x11 | 8 | 150 | 1.46 |
A: 7 Rib 8 Opening
B:9 Rib 4 Opening
C: 5 Rib 8 opening
Detail Images |
1.Steel formwork are used to form concrete slab and supported by
decking beam.
2.The construction formwork parts are connected with CO2 arc
welding to ensure good craking and deformation resistance.
3.The surface of formwork are anti-rust oil painted,which it has
waterproof funcation and provide a longer woking life span.
4.The formwork is made of Q235 strong steel which can support the
heavy duty concrete slab and roof .
1. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
4.5×15 | 0.3 | 4 | 75 | 1.26 | 610/750×2440 |
4.5×15 | 0.35 | 4 | 75 | 1.47 | 610/750×2440 |
4.5×15 | 0.4 | 4 | 75 | 1.68 | 610/750×2440 |
4.5×15 | 0.45 | 4 | 75 | 1.89 | 610/750×2440 |
4.5×15 | 0.5 | 4 | 75 | 2.10 | 610/750×2440 |
2. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
4.5×15 | 0.3 | 8 | 150 | 1.25 | 610×2440 |
4.5×15 | 0.35 | 8 | 150 | 1.46 | 610×2440 |
4.5×15 | 0.4 | 8 | 150 | 1.67 | 610×2440 |
4.5×15 | 0.45 | 8 | 150 | 1.88 | 610×2440 |
4.5×15 | 0.5 | 8 | 150 | 2.09 | 610×2440 |
3. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
10×17 | 0.3 | 8 | 75 | 1.06 | 610×2440 |
10×17 | 0.35 | 8 | 75 | 1.23 | 610×2440 |
10×17 | 0.4 | 8 | 75 | 1.41 | 610×2440 |
10×17 | 0.45 | 8 | 75 | 1.59 | 610×2440 |
10×17 | 0.5 | 8 | 75 | 1.76 | 610×2440 |
4. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
10×18 | 0.2 | 8 | 150 | 0.45 | 610×2440 |
10×18 | 0.25 | 8 | 150 | 0.56 | 610×2440 |
10×18 | 0.3 | 8 | 150 | 0.68 | 610×2440 |
10×18 | 0.35 | 8 | 150 | 0.79 | 610×2440 |
10×18 | 0.4 | 8 | 150 | 0.90 | 610×2440 |
10×18 | 0.45 | 8 | 150 | 1.01 | 610×2440 |
10×18 | 0.5 | 8 | 150 | 1.13 | 610×2440 |
10×18 | 0.6 | 8 | 150 | 1.35 | 610×2440 |
5. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight 3/8 Rib Lath(Hi Rib ) | |||||
Finish | Wt.per Sq.Yd. | Sheet Size | Pes.Bdl | Yds/Bdl | Yds/Pallet |
Galv. | 3.4lbs | 27”×96” | 10 |
Specifications:
Sheet size: 27'' x 96'' 27'' x 84''
Finish | Wt.per Sq.Yd. | Sheet Size | Pes/Bdl | Yds/Bdl | Yds/Pallet | |
Galv. | 3.4 lbs | 27" ×96" | 10 | 20 | 1000 | |
M.T=Material Thickness; SW ×LW=Size of opening; R.H=Rib Height; R.D=Rib Distande | ||||||
Model | M.T/mm | SW ×LW/mm | R.H/mm | R.D/mm | Wt /Kg/m² | Sheet |
JC- Rib Lath-001 | 0.30 | 12×8 | 5 | 100 | 1.2 | 610 |
JC- Rib Lath-002 | 0.35 | 12×8 | 5 | 100 | 1.4 | 610 |
JC- Rib Lath-003 | 0.40 | 12×8 | 5 | 100 | 1.6 | 610 |
JC- Rib Lath-004 | 0.30 | 16×11 | 8 | 150 | 0.88 | 610 |
JC- Rib Lath-005 | 0.35 | 16×11 | 8 | 150 | 1.18 | 610 |
JC- Rib Lath-006 | 0.40 | 16×11 | 8 | 150 | 1.46 | 610 |
- Rib Lath must be fixed with the apexes of the ribs in contact
with the support or the backing.
- Rib Lath should be lapped at the sides wire tied at intervals not
exceeding 150mm.
- At the ends of the sheets, the Rib Lath should be overlapped with
at least 100mm (4”).
1.Are you a manufacture?
Yes, we have been in providing the products in this field for 13 years.
2. Is customized available?
Yes, according to your detailed drawings you provide.
3. How many days will the samples be finished? And how about the mass production ?
Generally the samples will be sent immediately by the air express in 3~5 days if the goods are in stock .Normally within 30 days or according to your order .
4. What’s the payment terms?
L/C; T/T; D/P; D/A; Western union; MoneyGram, Paypal