Anping County Hengyou Wire mesh Products Co., Ltd |
|
Specification:
Product | Thickness (mm) | Weight (kg) | Width (mm) | Length (mm) | Rib Height (mm) | Rib Distance(mm) |
High Ribbed Formwork | 0.21 | 1.70 | 450 | 2200 | 14-20 | 90 |
0.23 | 1.90 | 450 | 2200 | 14-20 | 90 | |
0.30 | 2.48 | 450 | 2200 | 14-20 | 90 | |
035 | 2.90 | 450 | 2200 | 14-20 | 90 | |
0.40 | 3.30 | 450 | 2200 | 14-20 | 90 | |
0.45 | 3.70 | 450 | 2200 | 14-20 | 90 | |
0.50 | 4.10 | 450 | 2200 | 14-20 | 90 |
(1) Mechanics performance is good, the lateral pressure is small.
(2)Optimization of process, increase the shearing interface
(3) Light weight, easy to transport and install.
(4) Easy to through and continuous banding steel bar.
(5)The bell socket and cutting easy operation
The Usage of Rib Lath
1.Used as fire wall in high and low residential building;
2.Used to construct partition;
3.Used as floor slab or partition wall;
4.Used as inside and outside wall and enclosure of the permanent
house;
5.Used in protection against the tide;
6.Used in tunnel, sewer and fence;
7.Used in shipyard and retaining wall;
8.Used as panel and arch floor;
9.Used in nuclear power plant, storage bunker, etc;
10.Used in special projects, such as, landscaping, sculpture, etc;
11.Used in slope protection, claybank,etc.
Product Parameters | Model | Thickness (mm) | Weight (kg) | Width (mm) | Length (mm) | DCL020 | 0.20 | 1.70 | 445 | 2200-2500 | DCL025 | 0.25 | 2.10 | 445 | 2200-2500 | DCL030 | 0.30 | 2.60 | 445 | 2200-2500 | DCL035 | 0.35 | 3.00 | 445 | 2200-2500 | DCL040 | 0.40 | 3.40 | 445 | 2200-2500 | DCL045 | 0.45 | 3.80 | 445 | 2200-2500 | DCL050 | 0.50 | 4.20 | 445 | 2200-2500 | Thickness(mm) | width(mm) | length(mm) | measurement(m2) |
bright sheet | 0.1 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
bright sheet | 0.13 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
bright sheet | 0.15 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
Electro galvanizing | 0.1 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
Electro galvanizing | 0.13 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
Electro galvanizing | 0.15 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
hot galvanizing | 0.16 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
hot galvanizing | 0.2 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
hot galvanizing | 0.23 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
hot galvanizing | 0.25 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
hot galvanizing | 0.3 | 450 | 2000 | 0.9 | ||||||||||||||||||||||||||||||||||||||||
hot galvanizing | 0.35 | 450 | 2000 | 0.9 |
Installation:
Hi-rib lath is ideal for refurbishing damaged or aged masonry
walls, when a key for rendering is not certain due to
disintegration or softening of the wall face.
Lath should be fixed with apexes of ribs against the wall, edge
ribs of sheets nesting into each other should be wire-tied every
15cm and ends of sheets should be lapped not less than 2.5cm and
nesting ribs securely tied together.
Stainless steel fixings should be used at sufficient intervals to
hold the lath firmly in position.
1. Is your samples free?
Yes, we can provide free samples to my clients.
2. How many days will the samples be finished?
Generally the samples will be sent immediately by the air express
in 2~3 days if the goods are in stock.
3. And how about the mass production?
Normally within 20-25 days according to your order.
4. Are you a manufacture?
Yes, we have been in providing the products in this field for 15
years.
5. Is customized availabls?
Yes, we can OEM according to your detailed drawings.