Active Member
|
[China]
Address: Anping county, Hengshui city, Hebei province of China
Contact name:Bob Hope Wei
Anping County Hengyou Wire mesh Products Co., Ltd |
|
1 Width of rib lath :100-900mm
2 Distance of rib lath :50-150mm
3 Hole of rib lath :7x11, 8x20,8x13,16*11,20*9
4 Quality Certification:ISO9000:2001
5.application of rib lath
1.Widely used as a plaster backing on ceilings, walls and stud partitions.
2.Rib Lath is also ideal for refurbishing damaged
in the ceiling. While these strips of paper make it harder to tie wire the lath to the grillage, it is possible.
Quite often, 686mm 3/8" High Rib Lath Formwork Metal flat and 3/8”) is specified for use on framing that doesn’t warrant its use. From table 3 of ASTM standard C 1063, expanded metal lath is approved for use on the underside of horizontal surfaces with framing supports spaced up to 16” on center. Flat rib expanded metal lath can be attached to supports for ceilings and soffits up to 19” on center, and 3/8” high rib can span 24” on center.
Detail Images | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
| SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
| 4.5×15 | 0.3 | 4 | 75 | 1.26 | 610/750×2440 |
| 4.5×15 | 0.35 | 4 | 75 | 1.47 | 610/750×2440 |
| 4.5×15 | 0.4 | 4 | 75 | 1.68 | 610/750×2440 |
| 4.5×15 | 0.45 | 4 | 75 | 1.89 | 610/750×2440 |
| 4.5×15 | 0.5 | 4 | 75 | 2.10 | 610/750×2440 |
2. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
| SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
| 4.5×15 | 0.3 | 8 | 150 | 1.25 | 610×2440 |
| 4.5×15 | 0.35 | 8 | 150 | 1.46 | 610×2440 |
| 4.5×15 | 0.4 | 8 | 150 | 1.67 | 610×2440 |
| 4.5×15 | 0.45 | 8 | 150 | 1.88 | 610×2440 |
| 4.5×15 | 0.5 | 8 | 150 | 2.09 | 610×2440 |
3. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
| SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
| 10×17 | 0.3 | 8 | 75 | 1.06 | 610×2440 |
| 10×17 | 0.35 | 8 | 75 | 1.23 | 610×2440 |
| 10×17 | 0.4 | 8 | 75 | 1.41 | 610×2440 |
| 10×17 | 0.45 | 8 | 75 | 1.59 | 610×2440 |
| 10×17 | 0.5 | 8 | 75 | 1.76 | 610×2440 |
4. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight | |||||
| SW×LW/mm | M.T/mm | R.H.mm | R.D./mm | Wt kg/m2 | Sheet size |
| 10×18 | 0.2 | 8 | 150 | 0.45 | 610×2440 |
| 10×18 | 0.25 | 8 | 150 | 0.56 | 610×2440 |
| 10×18 | 0.3 | 8 | 150 | 0.68 | 610×2440 |
| 10×18 | 0.35 | 8 | 150 | 0.79 | 610×2440 |
| 10×18 | 0.4 | 8 | 150 | 0.90 | 610×2440 |
| 10×18 | 0.45 | 8 | 150 | 1.01 | 610×2440 |
| 10×18 | 0.5 | 8 | 150 | 1.13 | 610×2440 |
| 10×18 | 0.6 | 8 | 150 | 1.35 | 610×2440 |
5. SW×LW=Size of opening R.H=Rib Height R.D=Rib Distance M.T= Material Weight 3/8 Rib Lath(Hi Rib ) | |||||
| Finish | Wt.per Sq.Yd. | Sheet Size | Pes.Bdl | Yds/Bdl | Yds/Pallet |
| Galv. | 3.4lbs | 27”×96” | 10 | ||
Advantages:
1, Filling self-compacting, vibration-free;
2, Pouring Free dismantle Free clean-up;
3, no roughened surface to provide an effective combination;
4, small size, light weight, easy handling;
5, easy to cut, easy to make steel throughout, easy to tie nail;
6 to prevent violent mold, keeping the site clean;
7, and easy drainage mesh, and reinforcing structure;
8, to prevent the concrete surface cracks;
9, labor, material saving, high efficiency;
10, saving template support material.
1.Are you a manufacture?
Yes, we have been in providing the products in this field for 13 years.
2. Is customized available?
Yes, according to your detailed drawings you provide.
3. How many days will the samples be finished? And how about the mass production ?
Generally the samples will be sent immediately by the air express in 3~5 days if the goods are in stock .Normally within 30 days or according to your order .
4. What’s the payment terms?
L/C; T/T; D/P; D/A; Western union; MoneyGram, Paypal
