Dewei Medical Equipment Co., Ltd |
Verified Suppliers
|
|
Mindray Hematology Reagents MINDRAY BC-5390 BC-5380 BC-5300 BC-5180
BC-5100 ( with Barcode)
Usage of BC reagents
To be used for blood cell counting, sizing, and WBC
differentiation, hemoglobin determination on Mindray BC-5390
BC-5380 BC-5300 BC-5180 BC-5100 hematology analyzers. This product
is for In Vitro Diagnostic use only.
Specification of BC reagents
Compatible reagents on Mindray BC-5390 BC-5380 BC-5300 BC-5180 | ||
Cat. No | Description | Pack Size |
DWX-50222 | DILUENT-BC53 | 20L |
DWX-50223 | LYSE-53LEO(I) | 1L×4 |
DWX-50224 | LYSE-53LEO(II) | 200ml×4 |
DWX-50225 | LYSE-53LH | 500ml×4 |
DWX-50226 | RINSE-BC5 | 1L×4 |
DWX-50227 | PROBE-BC | 50ml |
Does cell counter need use products for calibration
or quality control?
Calibration products are required in the following situations:
1. New instrument
2. After a major maintenance
3.The results of the quality control are not controllable.
4. The manufacturer recommends that the instrument be tested every
six months or three months to ensure the accuracy of the
instrument.
Quality control needs to be done once or twice a day.
Precaution
1. This product is an in vitro diagnostic reagent;
2. Pay attention to seal and prevent pollution;
3. Read the instructions carefully before use, and should stop
using them when they exceed the period of validity;
4. If the product freezes, it should be completely defrosted at
room temperature and used after mixing.
5. Waste liquid, waste, residual products and treatment of
contaminated packaging materials, please comply with local
regulations;
6. It is strictly forbidden to eat and avoid contact with eyes and
skin. Once Contact your eyes and skin,please clean immediately with
plenty of water and seek medical advice.
We have barcode for Mindray Hematology Analzyers.
Limitations of Detection Method
If the temperature of the reagent is out of the specified range,
the specimen's measurement parameters may appear abnormal. If in
this condition, please confirm the measurement parameters with the
microscopy method. Please refer to the instrument operation manual
for details.
Storage
The product should be stored in 2℃-35℃ and the storage period is 2
years. After opening the bottle, it is used in 15℃-30℃, and the
validity period is 60 days.
Attention
1. This product is an in vitro diagnostic reagent;
2. Pay attention to seal and prevent pollution;
3. Read the instructions carefully before use, and should stop
using them when they exceed the period of validity;
4. If the product freezes, it should be completely defrosted at
room temperature and used after mixing.
5. Waste liquid, waste, residual products and treatment of
contaminated packaging materials, please comply with local
regulations;
6. It is strictly forbidden to eat and avoid contact with eyes and
skin. Once Contact your eyes and skin,please clean immediately with
plenty of water and seek medical advice.
How about our after-sales service?
1. For international customers, the agent is responsible for
after-sales service.
2. For direct selling customers, it can provide free after-sales
service (excluding spare parts fee), and make the first reply on
the day of customer feedback.
3. For non-direct customers, the agent is responsible for providing
after-sales service, and our company can provide telephone
technical assistance.Under special circumstances, our company can
also offer engineers to assist, and the fee depend on specific
situation.