ZHEJANG HANJIN PASTIC LIMITED COMPANY |
|
CPVC101granule product explanation
CPVC raw material granules (For injection and extrusion) were developed by our company, from the physical and chemical performance indicators have reached the United States (LUBRIZOL) product requirements; Its good processing properties and chemical properties are better than the Japanese (SEKISUI) products, and there are a large number of technical support and good factory data applications.Also we find that our prices are most competitive in the international market. Our CPVC raw material granules are special for industrial and civil cold & hot water pipe injection molding, it is in scope broad processing, good liquidity, it matches with vicat heat temperature in , 110 temperature, it fits the technological requirements of all kinds of injection molding equipment. Quality fully meet the GB/T, such as ISO, ASTM standards and so on.
Product introduction:
HJ-CPVC1001 aggregate is suitable for the injection molding technique of production, to sail upstream the fitting general aggregate (also to be possible to use in other flinty injection molding product). The product has the good injection molding fluidity and superficial glossiness, and conforms to tap water health GB code. Performance indicators and Japan water, heat resistance performance of 20 ~ 40 degrees higher than that of PVC material, accord with the eu ROHS, PAHS, REACH, EN71 and other environmental requirements.
Product characteristic:
Is suitable in the injection molding technique of production; Mainly uses in sailing upstream the fitting product (also to be possible to use in other flinty injection molding product); The Uygur card temperature (5100 weights) are bigger than 110℃; Remarkable being flame-resistant performance.
Product physics target:
Project |
Test criteria |
Typical value |
Specific Gravity (g/cm3) |
ASTM D792-00 |
1.44-1.54 |
Tensile Strength | ASTM D638-03 (50mm/min) |
45Mpa 6980Psi |
Tensile Elongation % | ASTM D638-03 (50mm/min) |
30 |
Flexural Strength |
ASTM D790 |
10000 Psi |
Flexural MODulus |
ASTM D790 |
310000 Psi |
Impact Strength J/m | D256-05 (3.2mm/23℃) |
130J/m |
Vicar Distortion Temp ℃ | ASTM1215-00 3.2mm,120℃/1h50N |
90℃ 103℃105℃ 110℃ |
Flammability |
UL94 |
V-0 |
Mold Shrinkage % |
23℃ |
≤0.5 |
Degree of hardness |
ASTM D2240 |
83 HD |
Product packaging:
Outside wrapping knitting bag, each package of net weights 25±0.1Kg
Special explanation:
In this product showing correlation data, is we the correlation data which obtains under the specific test condition, the customer in confirmed when product should act according to own use and the environment request confirms and the confirmation. We provide the correlation technique data only supplies in the customer use process to refer.
In order to satisfy the customer with different need for the CPVC product ,We also can according to the demand to adjust the formula,such as material processing performance, stability, toughness, strength, weather, color, cost and so on. At the same time, it can effectively reduce the amount of material inventory and shorten the manufacturing cycle.
Zhejiang Hanjin plastic Company has own unique CPVC mixture of formula;It’s our goal of continuous efforts to reduce the cost of CPVC materials for customers and make them feel simply to production the cpvc just the same as upvc.
ZHEJIANG HANJIN PLASITC LIMITED COMPANY
Add: 1 Lvting Road, Dongcheng Development Zone, Huangyan, Taizhou, Zhejiang Province.
TEL: 0086-576-84231060
FAX: 0086-576-84210080
MOB: 0086-13806590935
http://www.hj-pipe.com/
Mail: sales5@wshj-plastic.com
hjp@wshj-plastic.com
Contact person: he ping