|
[China]
Trade Verify
Address: Bajiaowo Industrial Park, Wanjiang District, Dongguan, Guangdong, China
Contact name:Cindy Yang
Guang Yuan Technology (HK) Electronics Co., Limited |
|
Verified Suppliers
|
|
|
Medium Frequency Automatic Induction Copper Billet Forging Machine
Induction Heating Machine,Induction Forging Furnace,Induction Heating Equipment,Induction Heating forging
The equipment includes medium frequency induction heating machine, worktable, induction coil, feeding machine, Infrared temperature detector and some other parts.
| MFP | GYM-40KW | GYM-80KW | GYM-100KW | GYM-120KW | GYM-160KW | GYM-200KW | GYM-250KW | GYM-300KW | GYM-400KW | GYM-500KW |
| Bar Diameter | 15~30(mm) | 15~50(mm) | 20~50(mm) | 20~50(mm) | 25~80(mm) | 25~100MM | 25~110MM | 40~120(mm) | 40~140(mm) | 40~140(mm) |
| Production Rates | 0.1~0.12(T/h) | 0.2~0.25(T/h) | 0.2~0.25(T/h) | 0.2~0.3(T/h) | 0.3~0.37(T/h) | 0.4~0.6(T/h) | 0.4~0.65(T/h) | 0.7~0.8(T/h) | 0.8~0.9(T/h) | 1.0~1.2(T/h) |
| Output Power | 40KW | 80KW | 100KW | 120KW | 160KW | 200KW | 250KW | 300KW | 400KW | 500KW |
| Input Current | 60A | 120A | 150A | 180A | 240A | 300A | 375A | 450A | 600A | 750A |
| Work Frequency | 1~10KHZ | |||||||||
| Work Power | 380V/50~60HZ 3phases | |||||||||
| Duty Cycle | 24Hours non-stop | |||||||||
| Dimension | Customs Design depends on bar size | |||||||||
Features of medium frequency induction forging machine:
1. Wide frequency range: 1KHZ—20KHZ, according the diameter of working piece to choose suitable frequency.
2. When heating a whole piece of material, the length of induction coil can be made from 500mm –1m, when heating multiple pieces, better penetrating results can be guaranteed.
3. It adopts continuously heating method, with uniform load in induction coil, it can solve the problem of great voltage change in output power during heating process when the temperature of work piece reach 1100℃ from room temperature, by this way, actual output power can be always above 95% efficiency, thus the machine is effectively used.
4. When heating bronze, aluminum and other nonferrous metal, by suitable design of induction coil and capacitance, the actual output power of machine can be above 85% efficiency than calculated.
5. Compare with controllable silicon frequency machine, our equipment is of small size, easy maintenances, and can save power by approximately 15--20%.
Mainly used for work pieces heating, heating temperature is between
200-1400 degrees.
1, Pre-forging heating: applied to gear, ring gear, bearing,
shackle, rigging.
2, Online heating: Pipe anti-corrosion coating, long steel rod
heating, steel (wire) tube online quenching and tempering.
3, Local heating: U-bolt bending, thermal assembly of the
drum,Steel pipe elbow etc.
1. Germany SIEMENS INFINEON IGBT Module. ( 40-60KHZ oscillation
frequency, fast response time, superhigh stability, almost
spatter-free welding )
2. Japan Nichicon electrolytic capacitor. ( filter capacitor )
3. Imported transistor integrated block.
4. All water pipe use thermostability, High pressure resistance
best quality material.
5. Main card, signal circuit, drive circuit board,control circuit
board and components are adopted:Toshiba, Hitachi,Motorola, China's
top manufacturers.
6. International advanced all-solid-state semiconductor power
devices.
7.Technical advantage:perfect control, alarm display circuit,
getting full automatic tracking frequency, continuous adjustable
power, safe dependable protection,clear and accuracy data display
and etc.
8. Superiority Advantages: fast heating, wide application, small
size, easy installation, simple operation, low power consumption,
high efficiency.
Our services
1).Pre-sale service:
1.Inquiry and consulting service
2.recommend the most suitable for our customers according to their
requirements
3.Sample testing support
4.working videos available
5.View our factory
In-sale service:
1. Strictly manufacture the machine, according to relevant
technical standards.
2. Take run test, according to relevant equipment test run
regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
