Healthlead Corporation Limited |
|
It concludes 4 kinds of gear: Gear 1, Gear 2, Gear 3 and Standby
Gear | Gear 1 | Gear 2 | Gear 3 | Standby |
Speed (RPM/Min) | 1500±100 | 1900±150 | 2300±200 | N/A |
Whole machine power:(W) | 2±0.5 | 3±1 | 4±2 | 0.3 |
Button: (button light is bright blue)
ITEM ICON FUNCTION
Power switch key :Tap to turn on/off
Filter function
Wind speed adjustment key :Tap to set 2//3/1 gear
1) Standby state:
Plug in the power supply, the buzzer will beep once (0.2 seconds),
all the indicators will light up and it will enter the standby
state after self-checking. In the standby state, press the power
switch button once, the buzzer beeps, the power switch indicator light is on, the
wind speed 2nd gear indicator (2 lights are on) is on, and the
motor gear 2nd starts; press the power switch again, All
functions are turned off, enter the standby mode.
2) Wind speed mode:
Press the wind speed button to enter manual mode, 2312 cycle. The
wind speed gear indicator lights in turn (1 light on the first
gear, 2 lights on the second gear, 3 lights on the third gear).
3) Humidification function (natural humidification)
In the power-on mode, the humidification function works
automatically; when the water tank is drawn out, the power
indicator flashes off for 0.3 seconds and on for 0.3 seconds,
humidification and the machine do not work at this time.
When the water tank is installed, the power indicator light is off,
and the machine is in standby state; press the power switch, the
machine and the humidification function start to work.
4) UV lamp function
The UV lamp is turned on by default when it is turned on, and it
stops working when it is turned off.