1.27mm Pitch Straight Box Header Connector Brass Gold Plated

1.27mm Pitch Straight Box Header Connector Brass Gold Plated

• Box Header Connector is a Box header connector.

  This connector is widely used in electronic, electrical, instrument in the PCB circuit board, its role is in the circuit is blocked or isolated between the circuit, play a bridge function, take up the task of current or signal transmission.

  It is usually used with the busbar to form a board-to-board connection. Or it can be used with the electronic wiring harness terminal to form a board-to-wire connection.

  Different products require different specifications, so there are a variety of sizes.

• High temperature resistant insulating plastic (UL94V-0) material: PBT(only meet the wave soldering process).

  High temperature resistant insulating plastic (UL94V-0) material: PA6T, PA9T, LCP(can meet the wave soldering, reflow welding two kinds of process).

  The color of insulating plastic can be divided into black, white, blue, natural color and so on.

  Policy material: Brass (H65)

  Hardware plug contact terminal surface treatment: first plated with nickel in gold or silver, bright tin, wuxi, semi-gold tin etc.

• SPECIFICATIONS >>>

  Current Rating:1.0Amps

  Withstanding Voltage:AC 500Vmin/Minute

  Insulation Resistance:1000MΩ Min

  Contact Resistance:20 mΩ MAX

  Operation Temperature:-40℃to+105℃

  Material>>>

  Plastic material:PA6T/PA9T/LCP+30%G.F

  Color:Black,White,blue,Special

  Insrlator Material:Polyester(UL94V-0)

  Contact Material:Brass

  Contact Plating:Au Or Sn over 40u" Ni

  Max.Processing Temp: 230°C for 30-60 seconds

  (260°C for 10 seconds)