Xinting Machinery Co., Ltd. |
|
HDPE Large Diameter Hollow Wall Winding hdpe pipe production line / hdpe plastic pipe machine
Application of large diameter hollow wall winding pipe :
At present, the sewage and drainage systems in the world still use the cement pipes. However, due to its instable chemical property and loose connection, it has become the principle cause for environment pollution. On the other hand, the cast iron pipes cannot be used any more for its disadvantages, such as the inconvenient construction and expensive cost. In recently years, the plastic pipes have been draw great attention and have become the substitute products for cement pipes and cast iron pipes. All these shows that the twisted large diameter plastic pipes have a great market potentiality.
Usage
1. The pipe produced by the SGB large-diameter winding pipe
production line uses high-density polyethylene as the main raw
material. The first extruder extrudes the round pipe and sets it
into a square pipe through a shaping cooling machine, and then
enters the winding forming machine. The two extruders extruding the
melted adhesive strip to form a square tube with a spiral form. The
inner and outer walls of the extruder are flat and smooth. The
specifications are φ200-3000mm. According to different conditions
of use, the ring stiffness is divided into 4 levels, and the
maximum can be achieved. 16KN/m2, this kind of pipe has the
advantages of corrosion resistance, light weight, easy
installation, high through-flow, long life (50 years), etc. It can
replace the pipes made of high energy consumption materials
(cement, cast iron, ceramics, etc.), widely used In the highway,
municipal construction, residential quarters, sports fields,
squares, mines, agriculture, culverts, bridges and other areas of
sewage drainage pipelines.
The main specifications of the large diameter coiled pipe
production line are: SGB200-800; SGB300-1000; SGB300-1200;
SGB600-1600; SGB800-1800; SGB1000-2000; SGB1800-3000; users can
also match according to the actual situation of their own units
Advantage
Equipment advantages
1No need to buy different specifications of the mold - low
investment cost and occupy less space
2 mold does not require natural gas baking --- energy saving and
environmental protection
3 does not need to change the mold - the province of artificial -
high efficiency
4 Continuous production without stopping the machine - high
efficiency - ensuring product quality
5 pipe length 6 to 12 meters - low transportation costs - any -
length
6 socket cut at room temperature - low shrinkage - good welding
seal
The product diameters are 300-4000mm in diameter respectively, and
the quality conforms to the national GB/T19472.2-2004 standards.
The product can be used in continuous production of crescent tubes.
It can be used without fire baking molds, dynamic mold release,
continuous production, one-time molding of sockets, and production
length. According to the length of the transport vehicle can be
customized and many other advantages, the advent of the equipment,
will fill this equipment is not out of production international
market gap.
Main technical diameter & Configurations List:
Model | extruder | pipe range(mm) | max output capacity(kg/h) | total powder(kw) | ||
model | motor powder | ID(min) | OD(max) | |||
ZKCR800 | SJ65*30 | 45 | 200 | 800 | 200 | 150 |
SJ45*30 | 15 | |||||
ZKCR1200 | SJ65*33 | 75 | 400 | 1200 | 350 | 210 |
SJ45*33 | 30 | |||||
ZKCR1800 | SJ75*33 | 90 | 800 | 1800 | 450 | 320 |
SJ65*30 | 45 | |||||
ZKCR2600 | SJ90*33 | 160 | 1600 | 2600 | 600 | 400 |
SJ65*33 | 75 |
ZKCR3200 | SJ120*33 | 250 | 2000 | 3200 | 750 | 550 |
SJ75*33 | 90 |
No. | Item | Qty. |
1 | single screw extruder,model SJ65*33 | 1set |
2 | single screw extruder, SJ45*30(for melt welding material) | 1set |
3 | extrusion die head for rectangular pipe | 1set |
4 | die head for melt material | 5pcs |
5 | vacuum tank | 1set |
6 | cooling trough | 1set |
7 | forming machine | 1set |
8 | forming mold | 1set |
9 | cutter | 1set |
10 | stacker | 1set |
Our service:
Turn key project
Technical documents
We will offer you all necessary documents, e.g. general layout plan, water scheme, electrical diagram and user manual after the contract is executed.
Arrangement for inspection, installation and testing work
After being informed machines ready for inspection, customer can send engineers to our factory.
After the machines are delivered to customer’s factory, we will send one or two technicians to the factory after preparation work is completed. Technicians will be responsible for guide on-site installation and testing machines.
Meanwhile technicians will give free training lessons to labors in customer’s factory.
After one year quality guarantee period, we will provide after-sell service for all the life.