PP Foam PS PET Fibres Plastic Agglomerator Machine Stainless Steel Pot Body

PP foam PS PET fibres Plastic Agglomerator Machine / Plastic Recycling Plant

1. Application material:

The plastic flakes densifier or agglomerator is used to granulate the thermal plastic films, PET fibres, whose thickness is less than 2 mm into small ganules & pellets directly. The soft PVC, LDPE, HDPE, PS, PP, foam PS, PET fibres and other thermoplastics are suitable for it.

Usually, the customer usually use it for the recycled film material, after crushing washing drying, the recycled PP/PE film scrap still contains 5-10% mositure, which will cause big problem for the next procedure of extruding, at the same time, the recycled film scrap takes relatively large space, so it's better that we can have a machine which can reduce the size of recycled scrap and evaporate the mositure, that's why the agglomerator comes.

Power supply: 380V/3phase/50HZ, (or according to your country’s condition with extra charge.)

Working principle

Putting the waste into machine pot body make the material be quickly cut by the high speed rotating turn the blade and the fixed blade shear ,then the material along the pot body wall by the knife dish centrifugal force function ,at the same time, the material turning up and down by paddle and from all around to move towards to the center of the pot body. The friction of material itself and friction of pot wall and blades produce much friction heat under the high speed, making the materials temperature rises to the half-plastic condition and connects to small lump. Before the materials will block, advanced preparation quantitative water will all spray to the material. The cold water touch the hot materials will gasify and take out the surface heat soon , making the surface of the materials cool quickly and avoid blocking, then after crushing effect between rotary blade and fixed blade to cut into particles(irregular size materials). During the crushing, Also may join the appropriate color pigments according to needs.

Data sheet for plastic agglomerator plastic agglomerator machine for films capacity 300L-2000L densifier machine 

Technical Parameter:

We can also manufacturer the plastic agglomerator / densifier machines according to customer’s special material or special requirements.

FAQ

Q: What about your machinery?
A: Seeing is believing.Our strength technical team guarantee the highest quality,not only of machine,but also of precisely control and final product.

Q: What about the price?
A: Our price is based on reasonable competition.

Q: What about after service?
A: We can offer 18months warrant since the machinery arrived at your factory except for durable parts.After warrant,we will offer space parts or repair service with or without charges.

company information :