Peeler Copper Electric Wire Stripper Machine

918-KOF electric wire stripper cable wire stripping machine wire peeler copper wire peeler cable stripper

what we can supply : plastic PP PE washing and pelletizing machine ,pet bottle recycling machine , hdpe milk waste bottles recycling machine , PP woven bags recycling machine , tire recycling machine . different material depend on different machine design . The waste plastic recycling machine can be hot washed and cold washed . 

• Features:

• 1. High automation level, try best to reduce your cost on labor (especially for three shifts) and ensure high processing capacity: 500-3000kg/hr.
  2. Friendly control system (PLC integrated & separated control on each machine) and Touch screen panel, easy for operation, monitor and emergency stop.
  3. All parts contacting with plastic material and water are made of high-quality 304 stainless steel; ensure no second pollution to flakes.

  4. This China Professional Manufacture PET Bottle Crushing Washing Drying Recycling Line can easily wash and recycle waste PET bottle flakes. Equipment at the end of the washing line so that the completely dry flakes can be collected and packed directly after being washed.

  5. The whole production line can be designed on the basis of how dirty the flakes are, and make sure of the quality of the final products.

  6. Coordinating the production line with follow programmed work (granulating system), and it will make waste and dirty PET bottles to be the PET granule material and in order to producing new PET bottles.
  
   

  Flowchart Plastic PET Bottle Washing and Recycling Line for plastic recycling machine :
  Conveyor belt →Label remover machine → Sorting table→Conveyor belt → Crusher → Screw loader→ Float washing tank→ Friction washing machine → Screw loader→Hot washer tank → High-speed friction washing machine → Floating washing tank → Dewatering machine → hot air dryer system → zig zag air classifier system → Silo

take the waste wire for example : 

918-KOF is suitable for all kinds of wires (disperse automatically), wires within copper clad, wires within aluminum clad, and steel wires.
This machine has total 15 holes, including 11 round wire holes, 2 double-roles(can strip double core flat wires), and 2 press wire holes
It has stable performance, easy to use, and it's very practical, so it's the most common wire stripping machine.
 

Product Features:

Diameter Range of Cables Stripped: 1-50mm
Voltage: 220/380V
Power: 2.2KW
Dimensions: 700*610*840mm
Weight: 110kg
Output: 600-1700kg/day

This machine is easy to operate and convenient to carry, can process single core copper wire, twin cores copper wire.

1: Wheel adjuster 2:Blades adjuster

3,4: Center adjuster 5:Hard wire rolling line holes
A: 2 cores flat cables/wires feeding slots
B: Diameter 1-4mm cables/wires’ feeding slot
C: Diameter 4-7mm cables/wires’ feeding slot
D: Diameter 7-9mm cables/wires’ feeding slot
E: Diameter 9-12mm cables/wires’ feeding slot
F: Diameter 12-15mm cables/wires’ feeding slot
G: Diameter 15-18mm cables/wires’ feeding slot
H: Diameter 18-22mm cables/wires’ feeding slot
I: Diameter 22-25mm cables/wires’ feeding slot
J: Diameter 25-32mm cables/wires’ feeding slot
K: Diameter 32-40mm cables/wires’ feeding slot
L: Diameter 40-50mm cables/wires’ feeding slot


Before feeding the cables/wires,please cut off the head of the cables/wires,to avoid gaps caused to the blades.

Make sure the cables/wires’diameter are similar with the feeding holes ,large cables/wires in large feeding holes,small cables/wires in small feeding holes,flatCables/wires in flat feeding holes.

Operation
1. Comparing the wires’diameters with the feeding holes on the machine, feeding the wires one piece at one time. Before feeding the wires, please cut off the head of the wires, to avoid gaps caused to the blades.

2. On the output side, if the cuts on the wires are too deep, please check below points:
* Please adjust the handles on the input side, screw down or loose them. (M12 handles)
* Check whether the wires on the right position as you feeding them.
* Make sure the blades are sharp, if not, polish them with the oil stone.

3. On the output side, if see the plastic(PVC)has been stripped, but the copper wires can not been disgorged, please check below 4 points:
* Polish the axis of the upside with the oil stone.
* Check whether the springs are loose,if yes, screw down to make them tighten.
* The diameter of the wires are too small, please adjust the space between the two axises to 0.3-0.6mm.
* If the wires you want to strip are hot, also can not get the copper wires stripped out.

4. If the wires were blocked in the axises, please check below points:
* If the springs on the press wheels are too tight, loose them.
* There are too much oil on the cables/wires, please wipe it.

5. If see the blades tilted:
* Check whether the center adjuster was loosed.
* Centering adjustment and adjust the screws of two sides of it.

Note
Make sure the wires’diameter are similar with the feeding holes,large wires in large feeding holes,small wires in small feeding holes, flat wires in flat feeding holes.
Features

11 holes and 10 blades for easy access to any kind of cable or wire from the smallest to the largest
The professional device works even where conventional grip procedures fail
11 different guides guarantee the machining of all types of cable with variable diameter from 1 mm to 40 mm
Do not waste time with other models of slotting machines where you need to adjust the blade every time you change the diameter of the cable
This machine automatically adjusts itself
Among these guides we have the ability to work flat and rigid cables
This machine is also ideal for industrial use
The blades and rollers rotate together at the same time by means of the gear so that the cable does not slip
The springs are adjustable to give the right cutting pressure

Now let's take the PET bottle washing recycling line for example : 

recycling features:

Technical datas