Active Member
|
[China]
Address: Room 702-3,Ningbo Lishi Commercial building,Lane 578,45# Tiantong South Road,Yinzhou District,Ningbo,China
Contact name:Tina Kui
VAINO INTERNATIONAL LIMITED |
|
|
PETG PLC Blowing molding machine for 3 extrusin unit , blow mold machine
Advantage:
Adopt fast response PLC from Taiwan-techmation
Seperately control for 3 extrusin unit
Layer structure from outer to inner is : PE/REPE/PE
EACH LAYER THICKNESS IS CONTROLLED INDIVIDUALLY
Machine specification:
| Specifications | MP70 | |
| Material | PE,PP,(PVC,PA)OPTION | |
| Max container capacity | L | 5 |
| Number of die | set | 1,2,3,4,6 |
| Machine Dimension(L×W×H) | M | 3.4×2.36×2.36 |
| Total weight | ton | 4.5 |
| Clamping force | kn | 70 |
| Platen opening stroks | mm | 180-480 |
| Stroke of mould board | mm | 300 |
| Platen size | mm | 340×420 |
| Max mould size(W×H) | mm | 400×420 |
| Mould thinkness | mm | 185-250 |
| Screw diameter | mm | 70 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | kg/h | 65 |
| Number of heating zone | zone | 3 |
| Extruder heating power | kw | 14.5 |
| Power of screw-bar machine | kw | 0.18 |
| Extruder driving power | kw | 18.5 |
| Number of heating zone | zone | 2 |
| Power of die heating | kw | 6.5 |
| Max die-pin diameter | mm | 130 |
| General power of machine | kw | 42.68 |
| Power of the electric motor of oil pump | kw | 9.5 |
| Air pressure | Mpa | 0.6-0.8 |
| Average energy consumption | kw | 23 |
| Using quantity of compression air | m3/min | 1.5 |
| Using quantity of cooling water | m3/min | 1.5-2.5 |
Machine parts photo
