KEEPWAY INDUSTRIAL ( ASIA ) CO.,LTD |
Verified Suppliers
|
|
product
Lens:
f=7.36mm, FOV=55°
Auto IR-cut-remove (at night)
Viewing:
LCD display: 2.4” color display
TV output computer output: USB2.0, net cable connect
Night time illumination system:
IR-flash range: 25--30M
IR-LED: 33pcs no glow (940nm) IR LEDs
Three Basic Operational Modes
· OFF Mode: Power OFF mode.
· ON Mode: Active Passive Infrared Mode.
· SETUP Mode: SETUP/TEST Mode,you can set up camera or playback the
photos or videos clips.
MOUNTING AND POSITIONING the CAM
Mounting
There are two ways to mount the Cam.
the Cam. Thread one plastic buckle part onto each end of the belt.
Fasten the belt around
the tree trunk by clicking the buckle ends together.
on a tripod or other mounting accessories with a standard 1/4-20
thread.
Sensing angle and distance test
This test is recommended to check the sensing angle and monitoring
distance of the Cam. To perform the test:
1. Switch the Cam to the SETUP mode.
2. Make movements in front of the camera at several positions
within the area where you expect the
game or subjects to be. Try different distances and angles from the
camera.
3. If the motion indicator LED light blinks, it indicates that
position can be sensed. If it does not blink, that
position is outside of the sensing area.
The results of your testing will help you find the best placement
when mounting and aiming the Cam.The
height away from the ground should vary with the animal size
appropriately. In general, 3 to 6 feet is preferred.
Switching on the camera
Once you switch to the ON mode, the motion indicator LED (red) will
blink for about 10 seconds. This gives you
time to close and lock the front cover of the Cam and then walk
away. After it stops blinking, the PIR is
active, and any motion that is detected by it will trigger the
capture of photos or videos as programmed.
VIEW /DELETING IMAGE OR VIDEO ON THE CAMERA LCD SCREEN
There are three ways to review pictures or videos captures
Use the camera LCD screen to View/Delete Image or Video
1.Put the power switch in SETUP mode (switch to OFF first).
2.Push the OK (Replay) key to enter image review mode.
3.Use the UP/DOWN keys to scroll through your photos or videos.
Press the
RIGHT (Shot) key to review a video.Press OK to return
4.Push MENU to enter the Delete mode. You will see the first
″Delete″ screen, press the OK. Highlight the “Delete Current” or
“Delete All” option, then press OK.
KG785 SPECIFICATIONS
Maximum image size | 16MP |
Lens | f=7.45mm;F/NO:3.2;FOV=55°; Auto IR-Cut-Remove (at night) |
IR-Flash Range | 9m-21m;36 LEDs |
Display Screen | 2.4 inch HD Color Display; |
Memory Card | SD or SDHC Card, Maximum capacity 64GB |
Internal Memory | 0 |
Image Size | 16MP(4608x3456); 8MP(3264×2448); 3M(2048X1536); |
Image Recycle | ON/OFF |
Image Format | Full Screen/Wide Screen |
Video Size | 1920X1080;1280x720;640x360 |
PIR Sensitivity | PIR with 4 sensitivity levels: High/ Normal/ Low/Auto |
IR LED Control | High/Medium/Low |
Operation | Day/Night |
Response Time | <0.3s |
Triggering Interval | 1s-60m programmable |
Shutter Speed | 1/10-1/2000sec. |
Capture Numbers | 1-9 programmable |
Video Length | 5-60sec. programmable |
Power Supply | 8×AA recommended; |
Stand-by current | <0.09mA |
Power Consumption | <180mA(+800mA when IR-LED Lighted) |
Timed Scan | 2X;programmable |
Temperature Display | programmable |
Password | programmable |
Camera Name | Input |
Moon Display | programmable |
Audio Video | programmable |
User Interface | LCD display |
Interface | USB;SD card holder; |
Security | Strap |
Operating Temperature | -20-60℃(Storage temperature:-30-70℃) |
Operating Humidity | 5%-90% |
Security Authentication | FCC/CE/RoHs/WEEE |
company
Keeptime Industrial (Asia) Co., Ltd set up in 2003, is a coalition
of independent development of hardware and software, industrial
design, mold stamping, SMD assembly together, focusing on sales of
digital video products and consumer electronics. The most
experienced and technological innovation capability of enterprises,
we mainly undertake hunting cameras, bird-watching cameras, garden
cameras, sports Bluetooth headset, night vision, traps and other
products of the hardware and software development, production and
after-sales service.
Since its inception, the
enterprise has been in a rapid and healthy development track, and
has set up Keepway Industrial (Asia) Co., Ltd as a market
development and sales operations center and Huarui Technology
(Shenzhen) Co., Ltd as a research and development production
center. We have more than 6,000 square meters of manufacturing
plants and more than 1,000 square meters of research and
development management center.
After more than 10 years of
development, all have achieved good results. The formation of a
unity and pragmatic, pioneering and innovative R&D and
marketing teams makes our products exported to more than 20
countries in Europe and the United States. Especially in product
software development, wireless technology, image algorithms, lens
design, night vision technology, we have a major breakthrough. In
the professional technical knowledge and advanced innovative ideas,
we have successfully developed a variety of high-end consumer
digital products. And through continuous innovation, company access
to dozens of patents, in 2014 successfully achieved a national
high-tech enterprises eligible.