Active Member
|
[China]
Address: 716, Building 39, Liandong u Valley, No.100, Fengbin Road, Liangxi District, Wuxi City
Contact name:Liu
Dongtai Yaoqiang machinery Co.,Ltd |
|
|
PLC Control Horizontally Arranged Frequency Conversion System Drive Beam End Milling Machine For Steel Bridge
The DX series end milling machine is a professional milling processing equipment that has been trial-produced after two years on the basis of summarizing the technological characteristics of the end surface processing of the workpiece, absorbing the advantages of similar foreign machine tools, and combining the factory's many years of practical experience.
This series of face milling machines adopts a special milling power head, a high-strength welding bed and a lifting column body, and is driven by a frequency conversion system, a counting encoder and PLC process control, to realize the automatic operation of the milling process; the selection of standard or forming milling cutters can achieve multiple This kind of end face processing technology needs.
According to the requirements of different workpieces, supplemented by different worktables, the end faces of H-beams, BOX beams or other larger parts can be processed.
Specification
| Item | DX1530 |
| Milling work-piece height (mm) | 1500 |
| Milling work-piece width (mm) | 3000 |
| Max milling depth (mm) | 5 |
| Horizontal feed rate (mm/min) | 90~960 |
| Fast-back (mm/min) | 660 |
| Vertical feed rate (mm/min) | 200～650 |
| Cutter diameter (mm) | ￠200(12) |
| Horizontal fast forward (mm/min) | 1500～2000 |
| Vertical Fast Forward Speed (mm/min) | 1500～2000 |
| Main milling power (KW) | 7.5 |
| Spindle speed (rpm) | 80～400(Level 8 switch gear) |
| Horizontal feed power (KW) | 4 |
| Vertical feed power (KW) | 3 |
| Hydraulic station motor power (KW) | 2.2 |
| Hydraulic system operating pressure (Mpa) | 4 |
| Equipment weight (T) | 7.5 |
| Size of machine(mm) | 6500*1360*3800 |
Features:
1. The face milling machine body includes the face milling main
body, installation adjustment bolts, guide rail protection system,
horizontal feed mechanism mounting seat and other parts;
2. The horizontal feed drive system includes the main drive motor,
the reduction mechanism, the drive screw pair, the guide rail pair,
the slide and its adjustment mechanism, the power transmission
system, the guide rail chip removal parts, etc.;
3. The milling power system of H-beam face milling includes motors,
power transmission gearboxes, spindle systems, adjustment
mechanisms, milling cutters, etc.; the column body includes the
column body, guide rail pair, protective cover, etc.;
4. The main rotating operation box includes an operation box, a
rotating arm, and a circuit system; the vertical feed transmission
system includes a vertical feed motor, a reduction box, a lifting
drive screw pair, a lifting slide and its adjustment mechanism, a
counterweight mechanism, and a guide rail Chips and chip removal
parts, etc.
5. Workpiece clamping workbenches can be divided into H-shaped
steel clamping workbenches, box beam (BOX) clamping workbenches or
special clamping workbenches according to the different structure
of the work pieces.
