Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
stainless steel uns 31254 bars
1.uns 31254 bars
SMO 254 Stainless Steel Round Bars may be forged between 2100 Degree F /1900 Degree F (1150 Degree C /1040 Degree C). The versatility of SMO 254 Bars has led to its use in a variety of applications involving temperatures from cryogenic to above 2000 Degree F (1095 Degree C). SMO 254 Rods demonstrates good performance in high temperature nitriding environments. Stainless Steel 254 SMO Round Bars is used in Aerospace, Heat treatment, Gas Turbine components, Paper industry, and more.
2.Stainless Steel SMO 254 Round Bars Specification
| Grade | Stainless Steel SMO 254 (UNS S31254 ) |
| Standard | ASTM A276 / ASME SA376 | ASTM A479 /ASME SA479 |
| Dimension | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS Round Bars | Outside Diameter in the range of 4mm to 500mm |
| SS Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| SS Hex Bars | 18mm – 57mm (11/16″ to 2-3/4″) |
| SS Square Bars | 18mm – 47mm (11/16″ to 1-3/4″) |
| SS Flat Bars | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Size | 5 mm To 500 mm |
| Diameter | 0.1 mm to 100 mm |
| Length | 100 mm To 3000 mm Long & Above |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| STANDARD | WERKSTOFF NR. | UNS | SIS | BS | GOST | AFNOR | EN |
| SMO 254 | 1.4547 | S31254 | 2378 | – | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
| Grade | C | Mn | Si | Cu | S | P | Mo | Ni | Cr |
| SMO 254 | 0.02 | 1 | 0.08 | 0.5-1.0 | 0.01 | 0.03 | 6.0-6.5 | 17.5-18.5 | 19.5-20.5 |
| Density | Melting Point | Elongation | Tensile Strength | Yield Strength (0.2%Offset) |
| 7.95 g/cm3 | 1350 °C (2460 °F) | 35% | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 |
3.Round Bars Specification
| Product Types | Round Bar | Square Bar | Hexagon Bar | Flat Bar |
| Surface | Black or Bright or Pickling White | |||
| Standard | SUS, AISI, DIN | |||
| Manufacture Technique | Hot Rolling, Cold-drawing | |||
| Diameter | 5~500mm | |||
| Length | ≦12M or As Per Client's Requirements. | |||
| Diameter Tolerance | H7 H9 H10 H11 | |||
| Material Standard | Nickel Alloy | ASTM/ASME SB 425 | Alloy 825/Incoloy 825/UNS N08825 | |
| ASTM/ASME SB 446 | Alloy 625/UNS N06625 | |||
| ASTM/ASME SB164 | Monel 400/Alloy 400/UNS N04400 | |||
| ASTM/ASME SB 408 | Alloy 800HT/Incoloy 800HT/UNS N08811, Alloy 800/Incoloy 800/UNS N08800, Alloy 800H/Incoloy 800H/UNS N08810 | |||
| ASTM/ASME SB 649 | Alloy 925/Incoloy 925/UNS N09925, Alloy 926/Incoloy 926/UNS N08926, Alloy 31/UNS N08031 | |||
| ASTM/ASME SB 166 | Alloy 600/Inconel 600/UNS N06600,Alloy 601/Inconel 601/UNS N06601 | |||
| ASTM/ASME SB160 | Alloy 200/UNS N02200, Alloy 201/UNS N02201 | |||
| ASTM/ASME SB 472 | Hastelloy C-276/UNS N10276,Alloy 926/Incoloy 926/UNS N08926, Alloy 31/UNS N08031,Alloy 20/N08020, Alloy C-22/Hastelloy C-22/N06022, Alloy 600/Inconel 600/UNS N06600, | |||
| ASTM/ASME SB 473 | Alloy 20/UNS N08020 | |||
| ASTM/ASME SB 574 | Hastelloy C-276/UNS N10276 | |||
| ASTM/ASME SB 637 | Alloy 718/Inconel 718/N07718 | |||
| Stainless Steel | ASTM/ASME SA 276 | 304/SUS304/UNS S30400, 304L/UNS S30403, 316/UNS S31600, 316Ti/UNS S31635, 316H/UNS S31609, 316L/UNS S31603, 310S/UNS S31008, 321/UNS S32100, 321H/UNS S32109, 347/UNS S34700, 347H/UNS S34709, F51/S31803/2205, F53/S32750/2507, F55/S32760, F44/S31254/254SMO, S31050/1.4466, F904L/N08904, | ||
| ASTM/ASME SA 479 | 304H/UNS S30409 | |||
| Carbon Steel and Low Alloy Steel | ASTM/ASME SA 694 | F42, F46, F48, F50, F52, F56, F60, F65, F70 | ||
| ASTM/ASME SA 350 | LF2, LF3 | |||
| ASTM A105/ASME SA105 | ||||
