Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
Stainless Steel S34709 BAR 347H Round ROD
1.What is Stainless Steel 347H Bar/
This 347 alloy is austenitic, stabilized as well as chromium steel containing alloy, also it contains columbium which enables elimination of the carbide precipitation as well as intergranular corrosion test. This alloy bar is stabilized by adding tantalum as well as chromium. It offers the higher creep as well as stress rupture properties, that may be used for exposure where intergranular as well as sensitization are of concern. Adding of columbium enables this alloy to have the best corrosion resistance. this Stainless Steel 347H Bar shows use in the fabrication of the equipment which are to be placed in the severe corrosive conditions. This grade of a bar can easily be annealed at the temperature ranging between 1010 °C to 1193°C.
2.SS 347H Round Bar Equivalent Grades :
| STANDARD | WERKSTOFF NR. | UNS |
| SS 347H | 1.4961 | S34709 |
| Grade | C | Mn | Si | P | S | Cr | Ni | Ti |
| 347H | 0.04 – 0.10 | 2.00 max. | 0.75 max. | 0.045 max. | 0.03 max. | 17.0 – 19.0 | 9.0-13.0 | 8 x C min. |
| (1.00 max.) |
Mechanical Properties of SS 347H Bars
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| Standard | 347 / 1.4550 347H / 1.4961 |
|---|---|
| Designation | ASTM, ASME, AISI A 276 , SA 276, A 479, SA 479 |
| Range | 3 MM TO 350 MM DIA |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Application | Chemical Processing, Food Processing – equipment and storage, Petroleum Refining – fluid catalytic cracking units, polythionic acid service, Pharmaceutical Production, Waste Heat Recovery – recuperators, |
We exports Stainless Steel 347/347H Round Bars, Stainless Steel 347/347H Round Bars & Rods, Stainless Steel UNS S34700/S34709 Round Bars & Rods, ASTM A276 347/347H SS Bright & Black Bar, SS 347/347H Round bar to countries like Saudi Arabia, United Arab Emirates, Singapore, Malaysia, Germany, Iran, United Kingdom, Italy, Israel, Russia, United States Of America, South Africa, Kenya, Nigeria, Philippines.
3.Stainless Steel Round Bars
4.Product specification
| Product Types | Round Bar | Square Bar | Hexagon Bar | Flat Bar |
| Surface | Black or Bright or Pickling White | |||
| Standard | SUS, AISI, DIN | |||
| Manufacture Technique | Hot Rolling, Cold-drawing | |||
| Diameter | 5~500mm | |||
| Length | ≦12M or As Per Client's Requirements. | |||
| Diameter Tolerance | H7 H9 H10 H11 | |||
| Material Standard | Nickel Alloy | ASTM/ASME SB 425 | Alloy 825/Incoloy 825/UNS N08825 | |
| ASTM/ASME SB 446 | Alloy 625/UNS N06625 | |||
| ASTM/ASME SB164 | Monel 400/Alloy 400/UNS N04400 | |||
| ASTM/ASME SB 408 | Alloy 800HT/Incoloy 800HT/UNS N08811, Alloy 800/Incoloy 800/UNS N08800, Alloy 800H/Incoloy 800H/UNS N08810 | |||
| ASTM/ASME SB 649 | Alloy 925/Incoloy 925/UNS N09925, Alloy 926/Incoloy 926/UNS N08926, Alloy 31/UNS N08031 | |||
| ASTM/ASME SB 166 | Alloy 600/Inconel 600/UNS N06600,Alloy 601/Inconel 601/UNS N06601 | |||
| ASTM/ASME SB160 | Alloy 200/UNS N02200, Alloy 201/UNS N02201 | |||
| ASTM/ASME SB 472 | Hastelloy C-276/UNS N10276,Alloy 926/Incoloy 926/UNS N08926, Alloy 31/UNS N08031,Alloy 20/N08020, Alloy C-22/Hastelloy C-22/N06022, Alloy 600/Inconel 600/UNS N06600, | |||
| ASTM/ASME SB 473 | Alloy 20/UNS N08020 | |||
| ASTM/ASME SB 574 | Hastelloy C-276/UNS N10276 | |||
| ASTM/ASME SB 637 | Alloy 718/Inconel 718/N07718 | |||
| Stainless Steel | ASTM/ASME SA 276 | 304/SUS304/UNS S30400, 304L/UNS S30403, 316/UNS S31600, 316Ti/UNS S31635, 316H/UNS S31609, 316L/UNS S31603, 310S/UNS S31008, 321/UNS S32100, 321H/UNS S32109, 347/UNS S34700, 347H/UNS S34709, F51/S31803/2205, F53/S32750/2507, F55/S32760, F44/S31254/254SMO, S31050/1.4466, F904L/N08904, | ||
| ASTM/ASME SA 479 | 304H/UNS S30409 | |||
| Carbon Steel and Low Alloy Steel | ASTM/ASME SA 694 | F42, F46, F48, F50, F52, F56, F60, F65, F70 | ||
| ASTM/ASME SA 350 | LF2, LF3 | |||
| ASTM A105/ASME SA105 | ||||
5.Pictures showing
