Home Companies Zhengzhou Huitong Pipeline Equipment Co.,Ltd.

ASTM A105N Flange

Active Member

Contact Us

[China]

Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.

Contact name:Vicky

Zhengzhou Huitong Pipeline Equipment Co.,Ltd.

ASTM A105N Flange

Country/Region	china
City & Province	zhengzhou henan
Categories	Flanges

Product Details

ASTM A105N Flange

1. A105 Flanges are used for ambient and high temperature services and by nature have hardness level and nickel content within the limit of NACE. ASTM A105 has no grade.Sometimes A105N is described. N stands not for Grade, but for normalized. Normalizing is a type of heat treatment, applicable to ferrous metals only. The purpose of normalizing is to remove the internal stresses induced by heat treating, casting, forming etc. A105 / A105N flanges are used in low and middle pressure fluid pipe line, boiler, petroleum and natural gas industry, electric industry , shipbuilding, fertilizer equipment, etc,.

2. Type of Flanges

WN (Welding Neck), SO (slip on), PL (Plate), BL (Blind), Th (Threaded), SW (socket welding), LF/SE (lapped flange/stub end), LWN (long welding neck), Orifice flange, Reducing flange, etc

3. Nominal Chemical Requirement.

Grade	C	Mn	P	S	Si	Cu	Ni	Cr	Mo	V
A105	-	0.60	-	-	0.10	-	-	-
A105	0.35	1.05	0.035	0.040	0.35	0.40	0.40	0.30	0.12	0.08

4. Mechanical Requirement.

Grade	Condition	Tensile Strength min (MPa)	Yield Strength min (MPa)	Elongation (L = 4d%)	Reduction of Area % min	Brinell Hardness max
A105	-	485	250	22	30	187
A105	-

5. Heat Treatment:

Heat treatment is not mandatory requirement except:
1) Flanges above Class 300
2) Flanges of special design where the design pressure at the design temperature exceeds the rating of Class 300.
3) Flanges of special design where the design pressure or design temperature are not known.

Heat treatment, when required shall be annealing, normalizing OR normalizing and tempering OR quenching and tempering.