ASTM A234 WPB UNEQUAL TEE 2''X1'' SCH40 ASME B16.9

ASTM A234 WPB UNEQUAL TEE 2''X1'' SCH40 ASME B16.9

1. What is ASTM A234 gr WPB tee?

ASTM A234 gr WPB tee is a type of carbon steel fitting used for Piping connection in all industrial plants such as Oil & Gas, Petrochemical etc. All ASTM A234 gr WPB tee, SA234 Grade WPB Pipe Reducing Tee, ASTM A234 WPB Barred Tee & ASTM A234 WPB Carbon Steel equal tees are produced from European sourced raw material at Neelcon Steel. We offer these ASTM A234 Wpb Tee in sizes 6”nb to 40”nb and thicknesses 5mm to 35mm. All Tee ASTM A234 Gr Wpb are manufactured from plate, pressed in two halves with three weld seams. We offer 100% radiography on all ASTM A234 Tee welds as standard.

2. Equivalent grade of ASTM A234 gr WPB tee

3. Chemical Composition of ASTM A234 WPB Pipe Tee

Chemical Composition (%) of ASTM A234 Pipe Tee

Notes:

• For each reduction of 0.01% below the specified C maximum, an increase of 0.06% Mn above the specified maximum will be permitted, up to a maximum of 1.35%.
• The maximum carbon equivalent (C.E.) shall be 0.50, based on heat analysis and the formula C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15.
• The sum of Cu, Ni, Cr, and Mo shall not exceed 1.00%.
• The sum of Cr and Mo shall not exceed 0.32%.

4. Mechanical Properties of ASTM A234 WPB Tee

Check below ASTM A234 WPB Pipe Tee Properties before you order.

Where the wall thickness lies between two values above, the min elongation value is determined by the following equations:

• Longitudinal E=48t+15.00
• Transverse E=32t+10.00
• E = elongation in 2in [50mm], %
• t = actual thickness of specimen, in [mm]