Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
The steel shall conform to the chemical requirements prescribed in
Table 1.
| UNS | |||||||||||
| Designation | C | Mn | P | S | Si | Ni | Cr | Mo | N | Cu | Others |
| S31200 | 0.030 | 2.00 | 0.045 | 0.030 | 1.00 | 5.5–6.5 | 24.0–26.0 | 1.20–2.00 | 0.14–0.20 | . . . | . . . |
| S31260 | 0.030 | 1.00 | 0.030 | 0.030 | 0.75 | 5.5–7.5 | 24.0–26.0 | 2.5–3.5 | 0.10–0.30 | 0.20 –0.80 | W 0.10 –0.50 |
| S31500 | 0.030 | 1.20 –2.00 | 0.030 | 0.030 | 1.40 –2.00 | 4.3–5.2 | 18.0–19.0 | 2.50–3.00 | 0.05–0.1 | . . . | . . . |
| S31803 | 0.030 | 2.00 | 0.030 | 0.020 | 1.00 | 4.5–6.5 | 21.0–23.0 | 2.5–3.5 | 0.08–0.20 | . . . | . . . |
| S32001 | 0.030 | 4.00 –6.00 | 0.040 | 0.030 | 1.00 | 1.0–3.0 | 19.5–21.5 | 0.60 | 0.05–0.17 | 1.00 | . . . |
| S32003 | 0.030 | 2.00 | 0.030 | 0.020 | 1.00 | 3.0-4.0 | 19.5-22.5 | 1.50-2.00 | 0.14-0.20 | . . . | . . . |
| S32101 | 0.040 | 4.0-6.0 | 0.040 | 0.030 | 1.00 | 1.35-1.70 | 21.0-22.0 | 0.10-0.80 | 0.20-0.25 | 0.10 -0.80 | . . . |
| S32202 | 0.030 | 2.00 | 0.040 | 0.010 | 1.00 | 1.00–2.80 | 21.5–24.0 | 0.45 | 0.18–0.26 | . . . | . . . |
| S32205 | 0.030 | 2.00 | 0.030 | 0.020 | 1.00 | 4.5–6.5 | 22.0–23.0 | 3.0–3.5 | 0.14–0.20 | . . . | . . . |
| S32304 | 0.030 | 2.50 | 0.040 | 0.040 | 1.00 | 3.0–5.5 | 21.5–24.5 | 0.05–0.60 | 0.05–0.20 | 0.05 –0.60 | . . . |
| S32506 | 0.030 | 1.00 | 0.040 | 0.015 | 0.90 | 5.5–7.2 | 24.0–26.0 | 3.0–3.5 | 0.08–0.20 | . . . | W 0.05 –0.30 |
| S32520 | 0.030 | 1.50 | 0.035 | 0.020 | 0.80 | 5.5–8.0 | 23.0–25.0 | 3.–5. | 0.20–0.35 | 0.50 –3.00 | . . . |
| S32550 | 0.04 | 1.50 | 0.040 | 0.030 | 1.00 | 4.5–6.5 | 24.0–27.0 | 2.9–3.9 | 0.10–0.25 | 1.50 –2.50 | . . . |
| S32707 | 0.030 | 1.50 | 0.035 | 0.010 | 0.50 | 5.5–9.5 | 26.0–29.0 | 4.0–5.0 | 0.30–0.50 | 1.0 max | Co 0.5 –2.0 |
| S32750 | 0.030 | 1.20 | 0.035 | 0.020 | 0.80 | 6.0–8.0 | 24.0–26.0 | 3.0–5.0 | 0.24–0.32 | 0.50 | . . . |
| S32760 | 0.030 | 1.00 | 0.030 | 0.010 | 1.00 | 6.0–8.0 | 24.0–26.0 | 3.0–4.0 | 0.20–0.30 | 0.50 –1.00 | W 0.50 –1.00 |
| S32808 | 0.030 | 1.10 | 0.030 | 0.010 | 0.50 | 7.0–8.2 | 27.0–27.9 | 0.80–1.20 | 0.30–0.40 | . . . | W 2.10 –2.50 |
| S32900 | 0.08 | 1.00 | 0.040 | 0.030 | 0.75 | 2.5–5.0 | 23.0–28.0 | 1.00–2.00 | . . . | . . . | . . . |
| S32906 | 0.030 | 0.80 –1.50 | 0.030 | 0.030 | 0.80 | 5.8–7.5 | 28.0 –30.0 | 1.50–2.60 | 0.30–0.40 | 0.80 | . . . |
| S32950 | 0.030 | 2.00 | 0.035 | 0.010 | 0.60 | 3.5–5.2 | 26.0–29.0 | 1.00–2.50 | 0.15–0.35 | . . . | . . . |
| S33207 | 0.030 | 1.50 | 0.035 | 0.010 | 0.80 | 6.0–9.0 | 29.0–33.0 | 3.0–5.0 | 0.40–0.60 | 1.0 | . . . |
| S39274 | 0.030 | 1.00 | 0.030 | 0.020 | 0.80 | 6.0–8.0 | 24.0–26.0 | 2.5–3.5 | 0.24–0.32 | 0.20 –0.80 | W 1.50 –2.50 |
| S39277 | 0.025 | 0.80 | 0.025 | 0.002 | 0.80 | 6.5–8.0 | 24.0–26.0 | 3.00–4.00 | 0.23–0.33 | 1.20 –2.00 | W 0.80 –1.21 |
| S82011 | 0.030 | 2.0 –3.0 | 0.040 | 0.020 | 1.00 | 1.00–2.00 | 20.5–23.5 | 0.10–1.00 | 0.15–0.27 | 0.50 | . . . |
| S82441 | 0.030 | 2.50 –4.00 | 0.035 | 0.005 | 0.70 | 3.0–4.5 | 23.0–25.0 | 1.00–2.00 | 0.20–0.30 | 0.10 –0.80 | |
A Maximum, unless a range or minimum is indicated. Where ellipses
(...) appear in this table, there is no minimum and analysis for
the element need not be determined or reported.
B Designation established in accordance with Practice E527 and SAE
J1086.
C % Cr + 3.3 × % Mo + 16 × % N $ 41.
D % Cr + 3.3 × % Mo + 16 × % N $ 40.
