Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN | OR |
Hastelloy C276 | 2.4819 | N10276 | NW 0276 | ХН65МВУ | NiMo16Cr15W |
ЭП760
|
Stock Size Range and Specifications For ASTM B574 Hastelloy C276 Round Bar
Specification : EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard Specification : ASTM B574 / ASME SB574
Size : 15NB to 150NB IN
Diameter : 3.17mm to 350mm diameter
Length : 100 mm to 3000 mm Long & Above
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished
Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
C276 | 0.010 max | 1.00 max | 0.08 max | 0.03 max | 2.50 max | 50.99 min* | 14.50 – 16.50 | 4.00 – 7.00 | 15.00 – 17.00 | 0.04 max |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Hastelloy C276 | 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52,000 , MPa – 355 |
40 %
|
Differences between hot rolled steel and cold rolled steel
Hot Rolled Steel
Hot rolling is a mill process which involves rolling the steel at a
high temperature (typically at a temperature over 1700° F), which
is above the steel’s recrystallization temperature. When steel is
above the recrystallization temperature, it can be shaped and
formed easily, and the steel can be made in much larger sizes. Hot
rolled steel is typically cheaper than cold rolled steel due to the
fact that it is often manufactured without any delays in the
process, and therefore the reheating of the steel is not required
(as it is with cold rolled). When the steel cools off it will
shrink slightly thus giving less control on the size and shape of
the finished product when compared to cold rolled.
Uses: Hot rolled products like hot rolled steel bars are used in the welding and construction trades to make railroad tracks and I-beams, for example. Hot rolled steel is used in situations where precise shapes and tolerances are not required.
Cold Rolled Steel
Cold rolled steel is essentially hot rolled steel that has had
further processing. The steel is processed further in cold
reduction mills, where the material is cooled (at room temperature)
followed by annealing and/or tempers rolling. This process will
produce steel with closer dimensional tolerances and a wider range
of surface finishes. The term Cold Rolled is mistakenly used on all
products, when actually the product name refers to the rolling of
flat rolled sheet and coil products.
When referring to bar products, the term used is “cold finishing”, which usually consists of cold drawing and/or turning, grinding and polishing. This process results in higher yield points and has four main advantages:
Cold drawing increases the yield and tensile strengths, often
eliminating further costly thermal treatments.
Turning gets rid of surface imperfections.
Grinding narrows the original size tolerance range.
Polishing improves surface finish.
All cold products provide a superior surface finish, and are
superior in tolerance, concentricity, and straightness when
compared to hot rolled.
Cold finished bars are typically harder to work with than hot rolled due to the increased carbon content. However, this cannot be said about cold rolled sheet and hot rolled sheet. With these two products, the cold rolled product has low carbon content and it is typically annealed, making it softer than hot rolled sheet.
Uses: Any project where tolerances, surface condition, concentricity, and straightness are the major factors.