Home Companies Zhengzhou Huitong Pipeline Equipment Co.,Ltd.

Monel 400 Galvanizing Orifice Nickel Alloy Flanges ASTM B564 UNS N04400

Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
Active Member

Contact Us

[China] country

Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.

Contact name:Vicky

Inquir Now

Zhengzhou Huitong Pipeline Equipment Co.,Ltd.

Monel 400 Galvanizing Orifice Nickel Alloy Flanges ASTM B564 UNS N04400

Country/Region china
City & Province zhengzhou henan
Categories Nickel
InquireNow

Product Details

Monel 400 Galvanizing Orifice Nickel Alloy Flanges ASTM B564 UNS N04400

 

1.About monel 400

 

UNS N04400
Other common names: Alloy 400

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.
Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.
In what forms is Monel 400 Available?
• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Wire
What are the characteristics of Monel 400?
• Resistant to seawater and steam at high temperatures
• Excellent resistance to rapidly flowing brackish water or seawater
• Excellent resistance to stress corrosion cracking in most freshwaters
• Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
• Excellent resistance to neutral and alkaline salt
• Resistance to chloride induced stress corrosion cracking
• Good mechanical properties from sub-zero temperatures up to 1020° F
• High resistance to alkalis

Chemical Composition, %
CMnSSiNiCuFe
.30 max2.00 max.024 max.50 max63.0 min28.0-34.02.50 max

Corrosion Resistant Monel 400
Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.
This nickel alloy is attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F.
Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.
In what applications is Monel 400 used?
• Marine engineering
• Chemical and hydrocarbon processing equipment
• Gasoline and freshwater tanks
• Crude petroleum stills
• De-aerating heaters
• Boiler feed water heaters and other heat exchangers
• Valves, pumps, shafts, fittings, and fasteners
• Industrial heat exchangers
• Chlorinated solvents
• Crude oil distillation towers

Fabrication with Monel 400
Alloy 400 can easily be welded by gas-tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals. There is no need for post weld heat treatment, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement.
Finished fabrications can be produced to a wide range of mechanical properties when proper control of the amount of hot or cold working and the selection of appropriate thermal treatments is done.
Like most other nickel alloys, Monel 400 is typically tough to machine and will work harden. However, excellent results can e obtained if you make the correct choices for tooling and machining.

 

ASTM Specifications
Pipe SmlsPipe WeldedTube SmlsTube WeldedSheet/PlateBarForgingFittingWire
B165B725B163 B127B164B564B366 
Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material
Product FormConditionTensile (ksi).2% Yield (ksi)Elongation (%)Hardness (HRB)
Rod & BarAnnealed75-9025-5060-3560-80
Rod & BarCold-Drawn Stress Relieved84-12055-10040-2285-20 HRC
PlateAnnealed70-8528-5050-3560-76
SheetAnnealed70-8530-4545-3565-80
Tube & Pipe SeamlessAnnealed70-8525-4550-3575 max *

*The ranges shown are composites for various product sizes and therefore are not suitable for specification purposes. Hardness values are suitable for specification purposes provided tensile properties are not also specified..
Alloy 400 Trivia
*Alloy 400 is slightly magnetic at room temperature.
*This alloy has a long history of use as a corrosion resistant material, dating back to the early 20th century when it was developed as an attempt to use a high copper content nickel ore. The nickel and copper contents of the ore were in the approximate ratio which is now formally specified for the alloy.

 

2.Packing for flange

 

3.PMI Test:

 

 

4.What is orifice flange?

The standard orifice is a differential pressure generating device for measuring the flow. It can measure the flow of various fluids in the pipeline with various differential pressure gauges or transmitters. The orifice plate flowmeter throttling device includes a ring chamber orifice plate, a nozzle, etc. Intelligent throttle device (orifice flowmeter) is a new generation of flowmeter which integrates flow, temperature and pressure detection functions and can automatically compensate temperature and pressure. The orifice flowmeter adopts advanced computer technology and new micro-power technology. It has strong function, compact structure, simple operation and convenient use. The orifice plate flowmeter throttling device is used with differential pressure transmitter to measure the flow of liquid, steam and gas. Orifice plate flowmeter is widely used in petroleum, chemical, metallurgical, electric power, light industry and other departments.

 

Hot Products

Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube ASTM B407 - 01 1. Scope ...
ASTM B474 / B474M - 19 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy ...
ASTM A312 Stainless Steel Pipe Specification Standard Specification for Seamless, Welded, and ...
ASTM/ASME A815/SA815 Duplex & Super Duplex Steel F54 / F55 / F57 Buttweld Fittings As an acclaimed ...
ASTM A213/ASME SA213 covers low alloy steel pipes and minimum-wall-thickness, seamless ferritic and ...
ASTM A312 / A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic ...