Size M6 - M64 Inconel 718 Nickel Alloy Fasteners Stud Bolt DIN 960 UNS N07718

Size M6-M64 UNS N07718 Inconel 718 Nickel Alloy Fasteners Stud Bolt DIN 960

1. Fasteners Specification:

2.Inconel 718 description

INCONEL alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium

material used at -423° to 1300°F. Typical composition limits are shown in Table 1. The age-hardenable

alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its

resistance to postweld cracking, are outstanding. The ease and economy with which INCONEL alloy 718

can befabricated, combined with good tensile, fatigue, creep, and rupture strength, have resulted in its use

in a wide range of applications. Examples of these are components for liquid fueled rockets, rings, casings

and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic

tankage. It is also used for fasteners and instrumentation parts

3.Fasteners package method

Often small hardware, fasteners and other parts are packaged in bags and displayed in bins or on hangers.

Bagging is the most effective way to package and organize small parts, while also being the most flexible

and affordable. In order to better protect the products during transportation, we will pack the packed

products in wooden cases.

4.Fasteners Application

A fastener (US English) or fastening (UK English) is a hardware device that mechanically joins or affixes two

or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that

can be removed or dismantled without damaging the joining components. Welding is an example of creating

permanent joints. Steel fasteners are usually made of stainless steel, carbon steel, or alloy steel.

5.DIN 960

DIN 960 is the specification for partially threaded fine thread metric hex cap screws. The specification used

to produce the corresponding inch series fastener is ANSI B 18.2.1. However, the ANSI B 18.2.1 specification

encompasses eight product types under the broad heading of “Square and Hex Bolts and Screws.” Therefore,

one must state the pattern of the desired product; in this Product Metric Specification Type Din ISO ANSI/

ASME Scope 931 4014 Partially Threaded 933 4017 Fully Threaded 960 8676 Partially Threaded (Fine)

HCS 961 8765 B18.2.3.1M Fully Threaded (Fine) Hex Nuts 934 4032 B18.2.4.1M (style 1) classes 6, 8, & 10

SHCS 912 4762 B18.3.1M BH SHCS N/A 7380 B18.3.4M FHSCS N/A 7991 B18.3.5M Rev 3-4-09 case, hex

cap screw. Under the metric system, each of the eight product types would have its own individual standard.

6.Delivery:
Port:
Tianjin/Shanghai/Ningbo
Lead Time :

Why Choose Us

1.One-Stop Service,One Single Source.

2.No MOQ.

3.Best quality,competitive price

4.Fast Reply.

5.On-Time Delivery.

6.Professional sales and technical team .