Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
inconel 926 alloy 926 N08926 1.4529 SO BL SW TH LJ WN Welding
Flange
1. Inconel 926 flanges
| Inconel 926 SO flange | Inconel 926 BL flange |
| Inconel 926 SW flange | Inconel 926 TH flange |
| Inconel 926 LJ flange | Inconel 926 WN flange |
| Inconel 926 Slip-on flange | Inconel 926 threaded flange |
| Inconel 926 socket-welding flange | Inconel 926 blind flange |
| Inconel 926 lap-joint flange | Inconel 926 welding-neck flange |
2. Chemical Composition
| C | Mn | P | S | Si | Ni | Cr | Mo | Cu | N | Fe | ||
| alloy 926 | Min % | 24,00 | 19,00 | 6,00 | 0,50 | 0,15 | balance | |||||
| Max % | 0,020 | 2,00 | 0,03 | 0,01 | 0,50 | 26,00 | 21,00 | 7,00 | 1,50 | 0,25 | balance | |
| ASTM (N 08926) | ||||||||||||
| 1.4529 | Min % | 24,00 | 19,00 | 6,00 | 0,50 | 0,15 | ||||||
| Max % | 0,02 | 1,00 | 0,030 | 0,010 | 0,50 | 26,00 | 21,00 | 7,00 | 1,50 | 0,25 | ||
3. Physical properties
| Property | Value |
| Density: lb/in.3 | 0,293 |
| Hardness: HB Rockwell Hardness Number max. | <= 250 B100 (N08926-ASTM A249) |
| Permeabilität bei 20°C/68°F | 1,01 |
| magnetizable | might be slightly magnetic might increase through cold deformation |
| Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
| 20 / 68 93 / 200 | 415 (0,098) .... (0,103) | 12,0 ( 83) ..... ( 89) | 96 (577) .... (594) | 193 (28) ..... (27) | ..... ..... 16,6 (9,2) |
| 200 / 392 204 / 400 | 470 ..... (0,112) | 14,4 .... (100) | 104 .... (626) | 179 ....... ..... (26) | 16,6 (9,2) 16,6 (9,2) |
| 400 / 752 427 / 800 | 510 ...... (0,122) | 18,5 .... (131) | 112 ..... (679) | 168 ....... (24) ........ | 16,6 (9,2) 16,6 (9,2) |
| 500 / 932 538 / 1000 | 520 ..... (0,124) | 20,1 ..... (143) | 115 ..... (695) | 163 ....... (23) ....... | 16,9 ( 9,4) 17,0 ( 9,4) |
| 600 / 1112 | 525 ........ | 21,6 ... . | 117 ..... | 17,3 (9,6) |
| Temperature | 0,2% Yield strength in high temperatures | 1,0 % Yieldstrength in high temperatures |
| °C / °F | Rp 0,2 | Rp 1,0 |
| N/mm2 / ksi | N/mm2 / ksi | |
| 100 / 212 | 230 / 33,4 | 270 / 39,1 |
| 200 / 392 | 190 / 27,6 | 225 / 32,6 |
| 300 / 572 | 170 / 24,7 | 205 /29,7 |
| 400 / 752 | 160 / 23,2 | 190 727,6 |
| to ca 20 mm section thickness ksi calculated value | ||
4. Mechanical properties (20°C / 68°F)
| Yield strength Mpa/ (ksi) Yield strength ksi (Mpa) | 295 /(43) 43 (295) | to 20 mm/(solution anneales) (solution anneales) | N 08926 (ASTM A 249) |
Tensile strength Rm Mpa/(ksi) Tensile strength ksi (Mpa) | 600-800 /(87,00-116,00) 94 (650) | to 20 mm (solution anneales) (solution anneales) in 2 in.or 50mm | N 08926 (ASTM A 249) |
Elongationmin.min. % Elongation min.% | 35 35 | (solution anneales) (solution anneales) in 2 in.or 50mm | N 08926 (ASTM A 249) |
| impact work (ISO-V) | > 100 J /60 J | <=160 mm- lengthwise /Transveser | |
5. Packing:
We understand the importance of packaging specially in case of
international shipments as the consignment has to go through a
number of channels to reach the final destination, thus we take
proper care of packing.
We pack our goods in a various ways depending on the products. The
different ways in which our products are packed are:
#Shrink-wrapped
#Wooden Boxes
#Wooden Pallets
#Wooden Crates
#Carton boxes
6. FAQ:
Q:How does your factory do regarding quality control?
A:Quality is priority. we always attach great importance to quality
controlling from the beginning to the end.Mill Test Certificate is
supplied with shipment. If needed, a Third Party Inspection is
acceptable.
Q:May I have some samples before bulk order?
A:Yes, of course. samples are free but you have to pay the courier.
Q:Can we visit your Company?
A:Surely. Welcome to China and we will be honored to have a
customer and friend.
Q:What is the payment terms?
A:T/T, L/C ,Western Union,etc.
Q:What's your delivery time?
A:For stocks, we can send the goods to loading port within 7 days
after receiving your deposit.
For production period, it usually needs about 10days- 60days after
receiving the deposit.
Q:Is it OK to mark my logo on your products?
A:Yes. OEM and ODM are available for us.
