Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
WN TH SW SO BL LJ Nickel Alloy Flange Incoloy 800 Alloy 800 UNS
N08800
1.Incoloy Alloy ASTM B564 800 Threaded Flanges, Werkstoff No 1.4876
Incoloy Socket Weld Flanges, 800HT Alloy Lapped joint Flanges, ANSI
B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 Incoloy 800
Forged Flanges
2.Lap Joint Flanges
Lap Joint Flanges (LJ Flanges) are used on piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges.
Lap joint flange is having two components, a stub end, and a loose backing flange. Stub end is butt welded to the pipe and Backing flange freely move over the pipe. The backing flange can be of different material than stub material and normally of the carbon steel to save the cost. Lap flange is used where frequent dismantling is required, and space is constrained.
Furthermore, a standard lap joint flange will typically have a longer hub length in comparison to a slip on flange, but this is often considered unnecessary for many applications.
The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together is an assembly system.
3. INCOLOY 800 FLANGES CHEMICAL COMPOSITION
| Grade | C | Mn | Si | S | Ni | Cr | Fe | Al | Ti |
| Incoloy 800 | 0.1 max | 1.5 max | 1.0 max | 0.015 max | 30-35 | 19-23 | 39.5 min | 0.15-0.60 | 0.15-0.60 |
4. INCOLOY 800 FLANGES MECHANICAL PROPERTIES
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 % |
5. Type of ASTM B564 Incoloy 800 Flanges
| Type of ASTM B564 Incoloy 800 Flanges | Size | |
| Inconel 800 Slip-On Flanges | Inconel Threaded Flanges | 1/2″ – 48″ Raised Face or Flat Face |
| Inconel 800 Weld Neck Flanges | Inconel Socket Weld Flanges | |
| Inconel 800 Blind Flanges | Inconel Reducing Flanges | |
| Inconel 800 Lap Joint Flanges | Inconel Plate Flanges | |
6.Incoloy 800 Flanges Application Industry
» Mining Industries
» Transport Industries- Rail and Road
» Construction Industries / Building Systems
» Manufacturing Industries
» Agriculture Industries
» Energy Industries
» Water Industries
» Automotive Industries
» Ship Building Industries
» Nuclear Power Plant
» Paper & Pulp Industries
» Sugar Industries
» Engineering Cement Industries
» Petro-Chemical Industries
» Food Industries
» Oil & Gas Industries
» Chemical & Pharmaceutical Industries
