Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
UNS N06600 inconel 600 NS333 DIN 2.4816 ASTM B564 Forged Shaft Disc Ring Forgings
1. Inconel 600 Flanges, Inconel 600 Pipe Flanges, Alloy 600 Pipe Flanges, Inconel 600 Pipe Flanges, Inconel 600 Blind Flanges, Inconel 600 Weld Neck Flanges, Inconel 600 Threaded Flanges, 600 Ring Type Joint Flanges, Inconel 600 Spectacle Flanges, Inconel 600 Orifice Flanges
2. Inconel 600 Flanges Size & Specification
| Size : ½” to 36″ |
| Specifications : ASTM B 564 / ASME SB 564 |
| Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc. |
| Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings |
| Pressure Ratings : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 |
| Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
3. ASTM B564 Inconel 600 Flanges Chemical Composition
| Grade | C | Mn | Si | Cu | S | Ni | Cr | Fe |
| Inconel 600 | 0.15 max | 1.0 max | 0.5 max | 0.5 max | 0.015 max | 72.0 min | 14.0 – 17.0 | 6.0 – 10.0 |
4.ASTM B564 Inconel 600 Flanges mechanical properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
5. Testings (Destructive, Non Destructive):
| *Positive Material Identification - PMI Testing | *Hydrostatic Test |
| *Chemical Analysis - Spectro Analysis | *Hydrogen-Induced Cracking (HIC) Test, NACE TM0284 |
| *Mechanical Testing Such as Tensile, Elongation | *Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177 |
| *Micro Test | *Radiography Test |
| *Macro Test | *Dye Penetrant Test (DP Test) |
| *Hardness Test | *Ultra Sonic Test (UT) |
| *Pitting Resistance Test | *Eddy Current Testing |
| *Intergranular Corrosion (IGC) Test | *Impact Test |
| *Flaring Test | *Bend Test |
| *Flattening Test |
