Active Member
|
[China]
Address: No.276 Zhongan Road, Puzhuang, Linhu Town, Wuzhong District, Suzhou City, China
Contact name:Henry Zhang
Suzhou Runtai Precision Hardware Co,.Ltd. |
|
|
Yellow Zinc Plated Phillips Drive Flat Head Wood Screws Furniture Screws Tapping Screws
Products Descriptions
These steel screws are zinc plated to resist corrosion in wet environments. All are beveled under the head for use in countersunk holes. They press threads into material for a tight, secure hold. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
Related Wood Screws Informations
Products Specification
| Material | Zinc-Plated Steel |
| Screw Size | No. 18 |
| Screw Size Decimal Equivalent | 0.294" |
| Length | 4" |
| Head | |
| Diameter | 0.597" |
| Height | 0.191" |
| Drive Size | No. 4 |
| Drive Style | Phillips |
| Softwood Drill Bit Size | 9/64" |
| Softwood Drill Bit Size Decimal Equivalent | 0.141" |
| Hardwood Drill Bit Size | 3/16" |
| Hardwood Drill Bit Size Decimal Equivalent | 0.188" |
| Approximate Threads per Inch | 8 |
| Thread Direction | Right Hand |
| Threading | Partially Threaded |
| Min. Thread Length | 2.667" |
| Tapping Method | Thread Forming |
| Head Type | Flat |
| Flat Head Profile | Standard |
| Countersink Angle | 82° |
| Tip Type | Pointed |
| Shank Cross Section | Round |
| System of Measurement | Inch |
| For Use In | Wood |
More Products Pictures
