Suzhou Runtai Precision Hardware Co,.Ltd. |
|
Stainless Steel Tamper-Resistant Torx Flat Head Screw for Sheet Metal Countersunk Head Pin-in-Torx Drive Tapping Screws
Products Description
A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess.They're beveled under the head for a flush finish in countersunk holes. Made from 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic. They penetrate 0.025"and thinner sheet metal. Length is measured from the top of the head.
Products Specification
Material | 18-8 Stainless Steel |
Screw Size | No. 10 |
Screw Size Decimal Equivalent | 0.190" |
Length | 1 1/2" |
Head | |
Diameter | 0.378" |
Height | 0.127" |
Drive Size | T25 |
Drive Style | Tamper-Resistant Torx |
Drill Bit Size | No. 21 |
Drill Bit Size Decimal Equivalent | 0.159" |
Maximum Drilling Thickness | 0.025" |
Approximate Threads per Inch | 12 |
Thread Direction | Right Hand |
Threading | Fully Threaded |
Tapping Method | Thread Forming |
Tapping Screw Type | A/AB |
Head Type | Flat |
Flat Head Profile | Standard |
Countersink Angle | 82° |
Tip Type | Pointed |
Shank Cross Section | Round |
System of Measurement | Inch |
For Use In | Sheet Metal |
RoHS | Compliant |
Note: Material, Size and Surface Treatment for choose.
More Products Pictures