Active Member
|
[China]
Address: Add: F4, Bld.4, Xifa B industry Zone, Yintian, Xixiang, Bao'an, Shenzhen, China.
Contact name:Frank
Shenzhen Handar Optical Technology Co.,Ltd |
|
|
16 Channel HD CVI/AHD Video to fiber Converter support 720p and1080p, BNC Digital Video Converter
Overviems
The video (+Reverse Data) optical converter adopt the advanced
international digtal video and optical
fiber transmission technology, and implement the transmission of
real-time &synchronization , no-distortion
and high quality to multi-channel video singnal on the single-core
optical fiber . Video digital optical converter
adopt full digital video no-compression transmission technology and
high quality video effect , which can meet
the user's requirement . The plug-and-play makes the installation
more convenient and easier , the LED design
helps the user to know the working status easily,and it is
unnecessary to implement the spot adjustment , its
optical module and core circuit adopt the imported components that
have high stability , conform to the international
standards, which is applied to the different working environment.
Features
1. 10-bit diditally encoded and non-compressionbroadcast quality video transmission
2. Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3. Support any high-resolution video signal
4. Automatic compatible PAL, NTSC and SECAM video system
5. Power supply and other parameter state indication, which can monitor the operation condition of system
6. Support no-damage regenerative trunk of video
7. Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .
8. Special ASIC design
9. Industry-grade of operating temperature from -40℃ to 85℃ , which is applied to the different working environment
10. Hot-swap function
11. We can offer rack-mounted chassis in standard 1U/2U/2.5U/4U
Technical Specification
Specifications
| Video channels | 16 channel |
| Video bandwidth | 8 MHz |
| Automatic compatible video system | PAL, NTSC, SECAM |
| Video input / output impedance | 75 Ω (unbalance) |
| Video signal-to-noise ratio | ≥67dB |
| Differential gain | (10%-90%APL) DG <1% (typical value) |
| Differential phase | (10%-90%APL) DP <0.7° (typical value) |
| Video connector | BNC |
| Fiber-optic Specification | F/O connector: FC/ST/SC TX: Power: -5 ~ -0dBm Sensitivity: ≤-34dBm RX: Power:-5 ~ -0dBm Sensitivity: ≤-34dBm Transmission Distance: 60KM (single mode) Operating Wavelength: TX1310/RX1550nm (Transmitter) TX1550/RX1310nm (Receiver) |
| Specification of custom-made options | |
| Data | Connector: Terminal Blocks Encoded type: RS485 / RS422 / RS232 / Manchester Data rate: 0 - 400Kbps BER: ≤10-9 |
| Audio | Connector: Terminal Blocks Audio input / output impedance: 600Ω (Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted) |
| Telephone | Connector: RJ11 Bandwidth :8KHZ Features:Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO |
| Ethernet | Connector: RJ45 Support mode : Half duplex or Full duplex Standards:IEEE802.3 Data rate : 10M / 100Mbps Bandwidth: 25M |
| Video channels | 16 channels |
| Video bandwidth | 8 MHz |
| Automatic compatible video system | PAL,NTSC,SECAM |
| Video input / output impedance | 75 Ω(unbalance) |
| Video signal-to-noise ratio | ≥67dB |
| Differential gain | (10%-90%APL) DG <1% ( typical value) |
| Differential phase | (10%-90%APL) DP <0.7° ( typical value) |
| Video connector | BNC |
| Fiber-optic Specification | F/O connector: FC/ST/SC TX :Power:-5 ~ -0dBm Sensitivity :≤-34dBm RX:Power:-5 ~ -0dBm Sensitivity :≤-24dBm Transmission Distance :60KM (single mode) Operating Wavelength: TX1310/RX1550nm(Transmitter);TX1550/RX1310nm(Receiver) |
| Specification of custom-made options | |
| Data | Connector: Terminal Blocks Encoded type : RS485 / RS422 / RS232 / Manchester Data rate : 0 - 400Kbps BER: ≤10-9 |
| Audio | Connector: Terminal Blocks Audio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted) |
| Telephone | Connector: RJ11 Bandwidth :8KHZ Features:Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO |
| Ethernet | Connector: RJ45 Support mode : Half duplex or Full duplex Standards:IEEE802.3 Data rate : 100M / 1000Mbps Bandwidth: 25M |
| Video channels | 16 channels |
| Video bandwidth | 8 MHz |
| Automatic compatible video system |
PAL,NTSC,SECAM |
| Video input / output impedance | 75 Ω(unbalance) |
| Video signal-to-noise ratio | ≥67dB |
| Differential gain | (10%-90%APL) DG <1% ( typical value) |
| Differential phase | (10%-90%APL) DP <0.7° ( typical value) |
| Video connector | BNC |
| Fiber-optic Specification | F/O connector: FC/ST/SC TX :Power:-5 ~ -0dBm Sensitivity :≤-34dBm RX:Power:-5 ~ -0dBm Sensitivity :≤-24dBm Transmission Distance :60KM (single mode) Operating Wavelength: TX1310/RX1550nm(Transmitter);TX1550/RX1310nm(Receiver) |
| Specification of custom-made options | |
| Data | Connector: Terminal Blocks Encoded type : RS485 / RS422 / RS232 / Manchester Data rate : 0 - 400Kbps BER: ≤10-9 |
| Audio | Connector: Terminal Blocks Audio input / output impedance :600Ω(Balance/ unbalance) Audio input / output voltage :2Vp-p ( typical value) Audio input / output level :0dBm ( typical value) Video bandwidth:10HZ~12KHZ Audio digital encoded bandwidth :24bit Audio signal-to-noise ratio: S/N≥95dB (weighted) |
| Telephone | Connector: RJ11 Bandwidth :8KHZ Features:Support call-showing function ;support H-F Operating mode : Point to point hotline mode / FXS-FXO |
| Ethernet | Connector: RJ45 Support mode : Half duplex or Full duplex Standards:IEEE802.3 Data rate : 100M / 1000Mbps Bandwidth: 25M |
Mechanical Structure & Environment
| Power | DC5V 2A |
| Power Consumption | ≤6W |
| Working Temperature | -15ºC ~65ºC |
| Storage Temperature | -40ºC ~85ºC |
| Relative Humidity | 5%~95% ( no condensation) |
| MTBF | ≥ 100000Hours |
Certification
Application
Ordering information
| Model Number | Product Configuration | Fiber Interface | Fiber Mode | Wavelengths | Maximum Transmission Distance |
| HD-M2V-T/RF | 8Ch Video | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
| HD-S2V-T/RF | 8Ch Video | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
| HD-M2V↑1D↓3-T/RF | 8Ch Video 1 Ch Data | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
| HD-S2V↑1D↓3-T/RF | 8Ch Video 1 Ch Data | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
