Active Member
|
[China]
Address: Nankai Zone, Tianjin City, China
Contact name:Haman
China Frotec Environmental Co.,Ltd |
|
Automotive Turbo Charger Hose for BMW OEM hose Made in China
| Product Naman | Automotive Turbo Charger Hose for BMW OEM hose Made in China |
| Mainly Products | automotive hose, bearings, wire harness |
| Contact Person | Mr.Haman Ren |
| Company | Tianjin Haman Technology Co.,Ltd. |
| Phone | 0086-15822411016 |
| 0086-15822411016 | |
| Skype | hamanbearing |
| Website | www.hamantech.com |
| Website | www.hamantechnology.com |
| hamanbearing@hotmail.com | |
| haman@hamantech.com |
Product introduction
Automotive Turbo Charger Hose for BMW OEM hose Made in China
Automotive Turbo Charger Hose for BMW OEM hose Made in
China
1. Resistant to hardening, cracking, sunlight, moisture, steam,
dust
2. Extremely heat resistance, ozone aging resistance.
3. Various pressure ranges and to many chemicals.
4. Easy to install and run than pipe,
5. Not subject to corrosion, stress
6. Absorbs engine movement and vibration.
PROFILE |
|
|
|
we are the manufacturer: |
|
| |
Certificate : ISO 9001:2000 |
|
| |
Silicone Hose Catetory | Material of our product | ||
Straight Reducer | Silicone | ||
Straight Hump | Nature rubber | ||
T-Hose | Viton | ||
Elbow Reducer: 45°/60°/90°/135°/180° | NBR(nitrile -butadiene rubber) | ||
Silicone Hose Specification | Our Product Used for | ||
Material | Silicone | Engine Air Supply | Exhaust pipe |
Working temperature | -60 ~ 300 °C | Intake pipe | |
Support Pressure | 0.3 to 0.9MPa | Turbocharger hose | |
Explosive Pressure | 5.5~9.7MPa | Crankand & Camshaft | Breather Hose |
Hardness | 35~80 shore A | Engine Cooling System | Radiator Hose |
Thickness | 2mm ~ 5mm | Coolant pipe/water pipe | |
Diameter Range | 10mm~120mm | We are the regular supplier for | |
Color options | blue/black/red ,at your request | VOLVO, MERCEDES BENZ,SCANIA,FORD,IVECO, | |
Size tolerance | +/- 0.5mm | ||
Reinforcement | 1~4 layers of polyester or nomex | ||
We even can provide special products, according to customer's drawings or samples at any time. | |||
OEM hose was welcome |
|
| |
Logo designed was available |
|
| |
The product parameters
Automotive Turbo Charger Hose for BMW OEM hose Made in China
ID | First | Second layer | Third | Fourth | Low temperature℃ | High | High |
| 30～70 | NBR | AR line | CR | —— | -40 | 100 | 125 |
| 30～70 | CM | AR line | CM | —— | -35 | 100 | 125 |
| 30～70 | ECO | AR line | ECO | —— | -40 | 125 | 150 |
| 30～70 | ACM | AR line | ACM | —— | -40 | 160 | 175 |
| 30～70 | AEM | AR line | AEM | —— | -40 | 160 | 175 |
| 30～70 | HT-ACM | AR line | HT-ACM | —— | -40 | 175 | 190 |
| 30～70 | HT-AEM | AR line | HT-AEM | —— | -40 | 175 | 190 |
| 30～70 | VMQ | AR line | VMQ | —— | -40 | 200 | 230 |
| 30～70 | FKM | AR line | AR line | VMQ | -40 | 200 | 230 |
| 16～100 | ACM | Mesh cloth | ACM | —— | -40 | 160 | 175 |
| 16～100 | VMQ | Mesh cloth | VMQ | —— | -40 | 200 | 230 |
| 16～100 | FMVQ | Mesh cloth | VMQ | —— | -40 | 200 | 230 |
The product structure
Automotive Turbo Charger Hose for BMW OEM hose Made in China
1)Rubber product
Three layers structures
Reinforcement layer structure:
Four layers structures
Reinforcement layer structure:
Tianjin Haman Techonlogy Co., Ltd.
Mr.Haman (Sales Manager)
Address: Haiyiguoji, Xiqing Zone, Tianjin City, China
Website: www.hamantech.com
Tel: +86-022-86423955
Wechate: 15822411016
Whatsapp: +86-15822411016
Skype: hamanbearing
Email: haman@hamantech.com
hamanbearing@hotmail.com
