Home Companies Nanjing Token Electronics Science&Technology Co., Ltd.

Multi Range Closed Loop Hall Effect Current Sensor Precision Current Transducer

Active Member

Contact Us

[China]

Address: NO.80,FEITIAN AVENUE,INDUSTRIAL CLUSTER LUKOU TOWN

Contact name:Suki

Nanjing Token Electronics Science&Technology Co., Ltd.

Multi Range Closed Loop Hall Effect Current Sensor Precision Current Transducer

Country/Region	china

Product Details

Multi Range Closed Loop Hall Effect Current Sensor Precision Current Transducer

TBC-HXS5 series multi range current sensor is a closed loop device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit, it provides accurate electronic measurement of DC, AC or pulsed currents.

Electrical data(Ta=25℃±5℃)

Type Parameter	TBC10HXS5	TBC20HXS5	TBC30HXS5	TBC50HXS5	Unit
Rated input(Ipn)	10	20	30	50	A
Measuringrange(Ip)	30	60	90	150	A
Secondary Turns(Ns)	1600±2	1600±2	1200±1	1000±1	T
Internal measuring resister	100±0.1%	50±0.1%	25±0.1%	12.5±0.1%	Ω
Rated output voltage	0.625±0.5%	0.625±0.5%	0.625±0.5%	0.625±0.5%	V
Supply voltage	+5±5%				V
Power consumption	20+Ip/Ns				mA
Reference voltage	+2.5±0.4%				V
Zero voltage	@ Ip=0 2.5±0.4%				V
Offset voltage drift	@ -40～+85℃ ≤±0.5				mV/℃
Linearity	@ Ip=0-±Ipn ≤0.1				%FS
Magnetic offset voltage	@Ip=3XIpn-0 ≤±0.5				%Ipn
di/dt accurately followed	＞50				A/µS
Response time	@100A/μS,10%-90% ≤500				nS
Bandwidth	@ -1db DC～100				KHZ
Galvanic isolation	@ 50/60HZ,1min 2.5				KV

Applications

Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical

Mechanical dimension(for reference only)

Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm

Pin connections

Item	Turns	N(A) Primary rated current	Vout(V) Rated putout Voltage	[mΩ] Primary impedance	[uH] Primary Inductance	Connect point
Single Phase	1	±10(±20,±30,±50)	2.5±0.625±0.5%	0.05	0.025
	2	±5(±10,±15,±25)	2.5±0.625±0.5%	0.20	0.1
	3	±2.5(±5,±7.5,±12.5)	2.5±0.625±0.5%	1.00	0.4

Directions for use

When the current will be measured goes through a sensor ,the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor).
Custom design in the different rated input current and the output voltage available.

Standards