Active Member
|
[China]
Address: No.12 Lanxia Road,Moling Industrial Zone,Jiangning,Nanjing,China
Contact name:Li Ting
Nanjing Chieful Science & Technology Co., Ltd. |
|
|
Details:
Hall current sensors are mainly used to isolate and convert AC, DC,
pulse and other complex signals .After signals are
convertedaccording to the Hall Effect Theory,the can be directly
acquired by AD, DSP, PLC, secondary instruments and other devices.
| Electrical characteristics | |||||||
| Type | CS100EKG | CS200EKG | CS300EKG | CS500EKG | CS600EKG | ||
| IPN | Primary nominal input current | 100 | 200 | 300 | 500 | 600 | A |
| IP | Measuring range of primary current | 0～±200 | 0～±400 | 0～±600 | 0～±1000 | 0～±1200 | A |
| VOUT | Nominal output voltage | 4(±1%) | V | ||||
| VC | Supply voltage | ±12~±15(±5%) | V | ||||
| IC | Current consumption | 25 | mA | ||||
| Vd | Insulation voltage | AC/50Hz/1min 3.0 | kV | ||||
| εL | Linearity | ±1 | %FS | ||||
| V0 | Offset voltage | TA =25℃ 25 | mV | ||||
| VOM | Residual voltage | IPN→0 <±20 | mV | ||||
| VOT | Thermal drift of V0 | IPN=0 TA =-25～+85℃ <±1 | mV/℃ | ||||
| Tr | Response time | ≤7 | μs | ||||
| f | Frequency bandwidth(-3dB) | DC～20 | kHz | ||||
| TA | Ambient operating temperature | -25～+85 | ℃ | ||||
| TS | Ambient storage temperature | -40～+100 | ℃ | ||||
| RL | Load resistance | ≥10K | Ω | ||||
| m | Mass | 50 | g | ||||
| Standard | Q/320115QHKJ01-2010 | ||||||
| Dimensions of drawing (mm) | |||||||
Q1: Are you a factory?
A:We are a factory setted up more than 17 years and export more
than 10years.
Q2: When is the delivery date?
A: 7-10 working days in general.
Q3: Could you send me a quotation?
A: Sure.
Q4: How about the after service?
A: Five years warranty.
Q5: What about the shipping package?
A: Anti-static package and carton.
