Active Member
|
[China]
Address: 15/B - 15/F Cheuk Nang Plaza 250 Hennessy Road, Hong Kong
Contact name:Pansy Liu
Hafe International Limited |
|
|
ZL930 Wheel Loader 3ton Front Loader With Various Work Tools From China
Description
Great strength
Tilt cylinder bore of 160mm, enlarge the boom cylinder bore
from 110mm to 125mm, and increase the boom lifting
force by 29%.
12-ton strong tilt drawing force guarantees the outstanding
adaptation to various tough conditions.
7-ton strong boom lifting force ensures various operation methods
of high intensity.
High efficiency
The adopted 125 work pump features large displacement, strong oil
supply, and the total time of three devices is only 10.3s.
The turning radius is only 5420mm, short running distance,
fast loading speed, saving the fuel and high efficiency.
Single pump distribution, load-sensing steering, large flow, enough
power, simple and high efficiency.
High strength
Heavy load design. The front and rear frames adopt box type,
featuring thickness and high intensity.
The key structural parts adopt finite-element analysis, ensuring
the adaptation to various dangerous working conditions.
Long service life
The key articulated positions feature two-stage dust-proof, less
abrasion and longer service life.
Wear resistant blade and bucket teethfeature longer service
life.
The hydraulic pipe adopts 24° cone and O ring, settling the issue
of leakage.
Easily worn oil pipe is equipped with the protective bush,
prolonging the service life.
High factor of full bucket
Long bucket bottom, sharp bucket type, easily cutting in, much
material.
Lessen the opening angle, reduce the section, easily push in and
lift.
Convenient maintenance
The independent chamber design of the hydraulic oil tank return
circuit guarantees the conveninence of the maintenance.
Specification
| Overall paramenters | ||
| Overall weight (kg) | 9800 | |
| Capacitity of bucket (m³) | Standard bucket | 1.8 |
| Coal bucket | 2.3 | |
| Rock bucket | 1.4 | |
| Rated load(kg) | 3000 | |
| Moweable arm lifting time (s) | ≤6.5 | |
| Three items sum (s) | 9s | |
| Bucket incline forward time(s) | 1.43 | |
| Max digging up force (kn) | 90 | |
| Max slope angle (°) | ≤28 | |
| Min turning radius(mm) | 5110 | |
| Min ground clearance(mm) | 380 | |
| Max dumping height (mm) | 3200 | |
| Velocity (km/h) | Ⅰ~ Ⅳ gear forward | 7.7~33.6 |
| Ⅰ~Ⅱ gear reverse | 9.5~28 | |
| Overall dimession(mm) | Length | 6890 |
| Width | 2250 | |
| Height | 3070 | |
| Tyre tread | 1800 | |
| Wheel base | 2660 | |
| Diesel engine parameters | ||
| Model | Weichai DEUTZ WP6G125E22 | |
| Type | Vertical,water-cooling ,four-stroke,unforced inspiration ,combustion chamber | |
| Cylinder number - diameter×piston storke(mm) | 6-108×125 | |
| Rated power (KW) | 92 | |
| Rated speed(r/min) | 2400 | |
| Max torque (N.m) | 440/460 | |
| Fuel consumption(g/kw.h) | ≤232/235 | |
| Oil consumption (g/kw.h) | ≤1.63/2 | |
| Diameter of the fan (mm.) | Ф600 | |
| Transimission | ||
| Hydraulic torque converter | Type | Single stage ,single phase ,three elements |
| Converter coefficient | k=3.13 | |
| Colling type | Oil cooling | |
| Inlet oil pressure (mpa) | 0.6~0.65 | |
| Gearbox | Type | Fixed -spindle ,constant mesh ,power gearshift |
| Gearshifts | Forward four,reverse two | |
| Gear pump | CBQHA-F532-ALHL | |
| Operation pressure of clutch | 1.1~1.5 mpa | |
| Front,rear drive bridge | Main transmission type | Spiral bevel gear, single stage reducer |
| Final Reducer | Column straight gear planet speed reducer | |
| Central drive ratio | 4.375 | |
| Hub reduction ratio | 4.75 | |
| Wheel and tyre | Drive type | Four wheels drive |
| Tyre specifications | 17.5-25 | |
| Tyre pressure (mpa) | 0.280`0.295 | |
| Wheel rim type | 14.00/1.5-25 | |
| Braking system | ||
| Service brake(mm) | Type | Double pipes,gas drives oil ,four wheel disk type braking |
| Diameter of brake | Ф450 | |
| Diameter of brake Subsidiary pump | Ф75 | |
| Parking brake(mm) | type | Belt type flexible shaft |
| Diameter of brake drum | Ф240 | |
| Dimensions of the brake strip | 753×81×8 | |
| Turning system | ||
| Type | Open core no reaction full hydraulic steering system | |
| Cylinder number - diameter×piston storke(mm) | 2-Ф80×294 | |
| Turning pump | CBN-F563-B1FHL | |
| Working pressure (mpa) | 14 | |
| Flux(L/min) | 138.6 | |
Picture
