Home Companies Guangzhou Liwei Beauty Equipment Co., Ltd.

2016 portable nano steam gun mirco nano spray hair care hair perming and dying beauty equipment

Active Member

Contact Us

[China]

Address: RM A002, 4F, Changxing building. No.3 Xingye RD, Panyu District, Guangzhou, China

Contact name:niuniu

Guangzhou Liwei Beauty Equipment Co., Ltd.

2016 portable nano steam gun mirco nano spray hair care hair perming and dying beauty equipment

Country/Region china
City & Province guangzhou guangdong

Product Details

Product Description


2016 portable nano steam gun mirco nano spray hair care hair perming and dying hairdressing beauty equipment

specification


Product Size : 22 * 12 * 21 cm

Color : white

Voltage: 110 v or 220 v can be customized

Power: 1200 w

 

Capacity: 260 ml

Jet quantity : 22 / min

Shell : heat resistant plastic casing

 

 

Principle and function:

Multi-stage supercharging trough heat vapor generator is greater than 1 atmosphere using superheated steam generation principle, liquid water from saturated steam superheated vaporized into a single molecule of water, the water molecules of this 0.26 nanometers in diameter, with a latent heat of this nano energy water molecules, can successfully penetrate through a gap of about 1 nm pores, releasing latent heat into the hair inside the pores open, direct access between internal hair fibers between filling material, the hair for deep water, and to promote nutritional or dye penetration agents, to repair hair and promote pharmaceutical chemical reaction and shorten the time treatments

 


 

Operation process:

A, hair coloring operation process

1, shampoo

2, use the nano steam gun to steam the hair 5 minutes to open the cuticle hair to make the hair wet and soft and make the potion easy to penetrate into the hair.

3, smear nutrients before dyeing

4, after smearing ,apply the nano steam gun for five minutes to make the hair to absorb nutrients

5, dyeing, the dye evenly applied to the hair

6, apply the nano steam gun for about 5 minutes.

7, check the degree of hair color and then decide spray or not.

8, the end of the hair coloring, flushing, dry.

 

B, hair heating operation process

1, shampoo, then use the nano steam gun to steam the hair 5 minutes to open the cuticle hair to make the hair wet and soft and make the potion easy to penetrate into the hair.

2, smear nutrients before the nutrient solution softening

3, then apply the nano steam gun for five minutes

4, Apply a softener

5,apply the nano steam gun for about 5 minutes.(if the hair damaged, doesn’t need this step.)

6, check the degree of hair and then decide spray or not.

7, then follow the normal hair heating steps to do.

 

C, hair cold perm operating procedures

1, shampoo, then use the nano steam gun to steam the hair 5 minutes to open the cuticle hair to make the hair wet and soft and make the potion easy to penetrate into the hair.

2, smear nutrients before the nutrient solution softening

3, then apply the nano steam gun for five minutes

4. Apply a softener

5, apply the nano steam gun for about 5 minutes.(if the hair damaged, doesn’t need this step.)

6,apply the nano steam gun for moe 8 minutes,the effect will be better.

7, then follow the normal hair cold perm steps to do

 

D, hot-oiling care

1, shampoo, then use the nano steam gun to steam the hair 5 minutes to open the cuticle hair to make the hair wet and soft and make the potion easy to penetrate into the hair.

2, smear nutrients.

3,then apply the nano steam gun for five minutes.

4, the hot-oiling potion evenly applied to the hair

5, apply the nano steam gun for about 15 minutes

6, then follow the normal hot-oiling care steps to do

 

The above operation make the hair full of moisture, shine.

 


【 note 】 : When using the machine, it is necessary to strictly requires the use of pure water or distilled water after eliminating chlorine to avoid the residual chlorine in the tap water material, chloroform, etc., enters the body through breathing prompt the mucous membrane of the respiratory tract and skin toxicity, hair and skin contact, can let a hair to produce puffy fracture bifurcation, also make your skin bleaching skin layer falls off and tinea allergy skin itching and clinking.

 

 

Company Information


1. Profesisional work team for 10 years

2. Patient explanation of any questions.

3. No middleman. No extra charge.

4. Fast and safe delivery by express 

5. We are both manufacturer and seller

6. We also provide OEM and ODM service.

7. Minimum order quantity is one set.

8. Our products can be sold the world without any problem.

9. One year quality warranty and lifetime maintenance.

Packaging & Shipping


Our Services


We will guarantee the quality of our equipment, normally there is no quality problem

1. If there is a deficiency, please email or call us on the reasons, it would be best if this can be dealt with by email or telephone. Because some  the problems are caused by  using the machine in  wrong way.

our company for repair by ordinary post, or we could resend a new one to our client. If  the cost of posting the problematic device back to us is more than the value of a new  device, we would take it into consideration, according to the actual status; apply to re-send a completely new device back to our client.

2. We suggest the client to take photos of the area where the problem occurs, we will  pass them to our technician , our technician will give a satisfactory answer within        1-7 working days

3. If the problem comes from the spare part, we could consider in changing the spare  part for our client, which could be sent with his/her next order. If the next order is  uncertain, we could pay freight cost to send the spare parts.

4. If the problem comes from the main device, we could advice our client to post the  device back to our company for repair by ordinary post,or we send a new one to our client. If the cost of posting the problematic device back to us is more than the value of a new device, we would take it into consideration, according to  the actual status; apply to re-send a completely new device back to our client.

5. Please make sure, if  send the inferior one to us by air any advanced notice, we will not pay relevant air freight and custom order

6. CE certificate can gurantee the machine quality.

7. User manual or operating video will instruct  how to use the machine.

8. Proper packing is suitable for long way transportation.

9. Delivery Date:3-7 days after receive the money

10. Warranty:Host machine for 1 year,LIFETIME maintenance

FAQ


1. It is the first time to buy your product, how can I trust you?

It is a good question; most of customers maybe worry about it for the first time cooperation.We understand of it. First, we are a good and professional company; we have exported beauty equipments to the whole world many years. We solemnly promise:Good Faith and Punctuality. If you need, we can offersome customer feedback to you. Or you can buy the machine from our distributors in Europe, USA and South America.

2. What is the MOQ?

The MOQ is 1 unit. You can order one unit of our machine to test its quality at firsttime, and then order more.

Of course, if your order is large, we will offer you some discount.

3. Do you accept OEM service?
Sure, we can do OEM and ODM cooperation. But the quantity of the order should be more than 5 units for big machines,( or 10 units of portable machines)

4. How can I operate the machine?
Most of our machines are color touch screen, some ones are key-press control. All of them are very easy to operate. We will send the User Manual with the machine to you, and if it is first time to operate the machine, we will make a video for you. At last, when you get the machine, you can contact with us any time any way if you have any difficult to operate.

5. What is the payment method?
We accept T/T bank transfer; Western Union

6. What is the delivery time?
Usually we will send the machine 3 to 7 days after payment, if the order is large or do OEM cooperation, it will cost about 5 to 20 days according the quantity.

7. How about the shipping?
Shipping Way:
1. Ship by Express (door to door ) ; DHL; TNT; UPS; FEDEX; EMS
2. Ship by Air express to airport
3. Ship by sea
Note: Shipping by DHL, TNT,UPS, FEDEX, Shipping by Air express to airport usually cost 3 to 7 working days to arrive; Shipping by EMS usually cost 7 to 20 days; Shipping by sea usually cost 10 to 25 days.

Notice:some shipping companies may change our standard package in order to save shipping cost,

which may hurt the safety of the product,so we strongly suggest you  don't choose unfamiliar shipping company.

8. What is your warranty?
We offer one year warranty and life time maintenance.

All in all, we will try our best to serve you and also need your fully cooperation. Thanks.

If you have any question, please feel free to contact with us.
We may will always be there for you!

  

Yoyo(sales1)is waiting here for you!!!

 

Websitewww.gzlifeel.net
Emailsales1@gzlifeel.com
Whatsapp/Wechat+86-18922463866
Skypesales1@gzlifeel.com
Moblie+86-18922463866

Haste makes waste!!!

 

Hot Products

Product Description hifu ultrasonic wrinkle removal portable hifu beauty machine Principle of ...
Product Description 2016 new home use mini 808 diode laser hair removal portable beauty equipment ...
Product Description 2016 portable nano steam gun mirco nano spray hair care hair perming and dying ...
Product Description C8 Nd yag laser for freckles pigment age spots removal beauty machine Principle ...
Product Description Non-invasive newest sex vagin tighening technology female private parts care...
Product Description TDA noninvasive needle free mesotherapy gun Product Application TDA needle free ...