Home Companies GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD

1m Cable ABS Submersible Aquarium Heater For 10 Gallon Tank

Active Member

Contact Us

[China]

Address: 6th Floor,NO. 8, Aobang Plaza, Rd 2nd, Wanggang Gongye Street， Baiyun District, Guangzhou

Contact name:Sindy Jin

GUANG ZHOU CITY FREESEA ELECTRICAL CO., LTD

1m Cable ABS Submersible Aquarium Heater For 10 Gallon Tank

Country/Region	china
City & Province	guangzhou guangdong
Categories	Ice Tongs

Product Details

★【 Temperature range】:59°F~94°F, display Fahrenheit °F, this heater is designed for1~10 gallons tank.
★ Compact and small shape, with plastic guard.
★ It has memory function if power failure happens.
★ With 2 strong suction cups, can be replaced.
★ External temp controller, easy to set the temp.
★ Built-in thermometer, is sensitive in water.
★ Led digital display, show water temp.
★ Auto shut off when out of water, safe to use.
★ Auto stop heating when water temp is higher than 94℉.
★ This adjustable aquarium heater can be used for almost all kinds of small fish tanks, such as square, cylinder shaped or bowl tank, tank made of glass, acrylic or plastic.
★【Note】:this heater is 100% submersible use only, during its heating time, heater must be 100% submerged into the water.

Precautions

● Temperature control switch box should be higher than water surface.

● Heater should be completely submerged in the water to work properly.

● Please check whether this product uses a matching power grid voltage (110V-120V/60Hz).

● This product can not be repaired or modified by yourself, please ask supplier for suggestion.

● Turn off the power supply for 10 minutes before cleaning the tank or maintaining the heater.

● The power socket for heater must have a broken circuit switch.

● Please don’t use wet hand to install and maintain this heater, avoid from electric shock Temperature control box is not water proof, please put it above water. If its accidentally fall into water, Please unplug the power immediately and dry it out with blow dryer before use.

The Greatest Advantage

LED display

Multi-function LED digital display heater: Use advanced IC technology,

Oval appearance, large LED display.

Clearly and accurately displays the water temperature,

highlights your aquarium.

No need to buy another thermometer.

The Most Safety Operation

Instructions

How to adjust temperature:

There is a regulator connect with power cord, just press the button after heater has been installed,

and you can will see the LED display shows °F,

press the button until you see the display shows your expecting temperature (display 59~93℉ in cycle by),

and then leave it for heating up.

For example:

Expecting temperature is : 80℉ Heater display shows: 70℉ Then, Press the regulator 10 times,

then you will see the display shows from 70 to 80°F.

When you see the display shows 80°F,

then leave it for heating.

How to use the temperature setting?

After you place the heater fully in water, wait for about 10 seconds, the led then will display the accurate water temp. Then you can start to set the temp.
Press the set button on the controller over and over, the led digits will go circularly from 59 to 94F°, when you get the digit you want, stop and wait the led flashing for 3 times, then the setting is done.
After temp setting and during the heating time, the led displays the water temp.
Only show farenheit temp.

When does the heater stop heating and restart heating?

When the water temp reaches to the set temp, it stops heating, at this moment the water temp may go up 1 more farenheit degree if the tank is smaller than 10 gallon.

The tank heater will restart heating when water temp is 1℉ off the set temp.

Indicator light on the heater: on red means heating, light off means stop heating.

Details: