Tire Inflators for 12V Pocket Jump Starter

Electric Air Pump Tire Inflators for 12V Pocket Jump Starter

Model: TI-01

* Ideal for emergency or recreational use.
* Works with 12V car Multifunction Jump starters.
* Includes accessories for sports balls and other recreational uses.

Specification:
Operating Voltage: DC12V
Air Flow @ Opsi: ≥10L/min
Current @ Opsi: 2.5-4.5A
Pressure Gauge Scale: 0-300PSI
Dimension: 125*115*63mm
Weight: 0.65kg

Operation Instruction:

1. Connect power cord to designated battery socket.

2. Remove the dust cap from tire value and keep in secure location while not in use.

3. Carefully remove the air house from the side of the compressor and screw the value connector in place.Make sure the value is correctly connected,and not over tightened.

4. Press the 'ON' switch and the compressor will automatically start to inflate the tire.

5. Periodically pause the compressor to allow a steady tire pressure reading to be taken.

6. Once the correct tyre pressure has been reached,switch off the unit,disconnect it from the tire value, and place the dust cap back on.

Using the Adaptors:

1. Choose the compatible adaptor and screw it into the value connector.

2. Press the "ON" switch and the compressor will automatically start to inflate the tire.

3. Periodically pause the compressor to allow a steady tire pressure reading to be taken.