|
[China]
Trade Verify
Address: Weiye International Building, Yixian Road, Dali Town, Nanhai District, Foshan City
Contact name:Ryan
Foshan Huiju Decoration Material Co. Ltd. |
|
Verified Suppliers
|
|
|
Products Introduction
A Light Steel Keel Gypsum Board Ceiling System is a type of
suspended ceiling system commonly used in commercial and
residential buildings. It consists of a lightweight steel frame
(keel) that is suspended from the ceiling or roof structure, and
gypsum boards that are attached to the frame.
The keel is made of galvanized steel and typically has a C-shaped
or U-shaped cross-section. The keel sections are connected together
to form a grid-like structure that supports the gypsum boards. The
size and spacing of the keel sections can be adjusted to
accommodate different ceiling designs and load requirements.
| Accessories | Specification(mm) | Unit | Dosage | |||
| Height (mm) | Width (mm) | Thickness (mm) | Length (mm) | |||
| Main Channel | 27 | 60 | 1.2 | 3000 | M | 1m/Sqm |
| 27 | 60 | 1.1 | 3000 | M | 1m/Sqm | |
| 27 | 60 | 1 | 3000 | M | 1m/Sqm | |
| Vice Channel | 27 | 60 | 0.8 | 3000 | M | 3m/Sqm |
| 27 | 60 | 0.7 | 3000 | M | 3m/Sqm | |
| 27 | 60 | 0.6 | 3000 | M | 3m/Sqm | |
| 27 | 60 | 0.5 | 3000 | M | 3m/Sqm | |
| Wall Angle | 20 | 27 | 0.5 | 3000 | PCS | 0.2pcs/Sqm |
| Sleeve Anchor | φ8 | SET | 1set/Sqm | |||
| Thread Rod | φ6/8/10/12 | 3000 | M | 1m/Sqm | ||
| Nut | φ8 | PCS | 3pcs/Sqm | |||
| Drywalll Screw | 3.5*50 | Box | 1 box/40Sqm | |||
| 3.5*35 | Box | 1 box/40Sqm | ||||
| Hanger | / | PCS | 1 pcs/Sqm | |||
| Conneting Clip | / | PCS | 2 pcs/Sqm | |||
| Putty Powder | 20kgs/bag | BAG | 1bag/10Sqm | |||
| Joint Compound | 25kgs/bucket | Bucket | 0.2bucket/Sqm | |||
| Paper Joint Tape | 46*50000 | Roll | 1Roll/9Sqm | |||
| 46*75000 | Roll | 1Roll/13Sqm | ||||
Main Runner: The main runner is the primary T-shaped component that runs along
the length of the ceiling. It is used to support the cross tees and
the ceiling tiles.
Cross Tee: The cross tee is a T-shaped component that connects to the main
runner to form a grid pattern. It is used to support the ceiling
tiles.
Wall Angle: The wall angle is an L-shaped component that is used to create a
perimeter around the ceiling. It is attached to the walls and
provides a surface for the ceiling tiles to rest on.
Hanger: The hanger is a metal wire that is used to suspend the main
runners from the ceiling or the roof structure. It is attached to
the main runner using a clip or a hook.
Clip: The clip is a metal component that is used to connect the main
runner to the hanger wire. It is inserted into the slot on the main
runner and attached to the hanger wire.
Hook: The hook is a metal component that is used to connect the main
runner to the hanger wire. It is inserted into the hole on the main
runner and attached to the hanger wire.
The German type ceiling system is a type of suspended ceiling
system that is commonly used in commercial and residential
buildings. It consists of a metal grid that is suspended from the
ceiling, and ceiling tiles that are placed within the grid.
To install a German type ceiling system, the following steps should
be taken:
Measure the area where the ceiling system will be installed to determine the amount of materials needed.
Mark the ceiling for the location of the grid system.
Install the perimeter molding around the ceiling.
Install the hanger wires to suspend the main runners of the grid system from the ceiling.
Install the main runners of the grid system.
Install the cross tees of the grid system.
Place the ceiling tiles into the grid system.
Install the lighting fixtures and any other necessary accessories.
With strong flexibility, easy construction and simple maintenance, the ceiling system can meet various interior decoration needs and provide diverse design solutions and decorative effects. It can be used to improve the light, acoustics, heat insulation, thermal insulation, fireproofing and other properties of indoor spaces, while also hiding pipes, wiring, equipment and other cluttered indoor facilities, beautifying the indoor environment and improving the comfort of use.
1. Educational Buildings: Light steel keel gypsum board ceiling
systems are also used in educational buildings such as schools and
universities. They provide a durable and safe option for ceilings
in high-traffic areas such as classrooms and corridors.
2. Healthcare Facilities: This system is also popular in healthcare
facilities such as hospitals and clinics. It provides a clean and
hygienic surface that is easy to clean and maintain.
3. Industrial Buildings: Light steel keel gypsum board ceiling systems
are also used in industrial buildings such as warehouses and
factories. They provide a strong and durable option for ceilings in
these heavy-duty environments.
