Martensitic Grade 1.4418 X4CrNiMo16-5-1 Stainless Steel Round Bar

Martensitic grade 1.4418 X4CrNiMo16-5-1 Stainless Steel Round Bar

Grade EN 1.4418, DIN X4CrNiMo16-5-1 with low carbon content is popular with fabricators as they are 

easier to weld than standard stainless martensitic steels.

Martensitic 1.4418, X4CrNiMo16-5-1 achieve a strength level comparable in some cases to engineering

steels, with a corrosion resistance that is close to that of well known stainless EN 1.4301, AISI 304.

Stainless EN 1.4418 grade combines the following characteristics:

• Best pitting corrosion resistance of all martensitic stainless steel grades approaching that of 304
• Good strength. 700 MPa 0.2%PS, 900 MPa UTS at room temperature
• Excellent toughness, 80 J at room temperature. 40 J at -20°C
• Good weldability, especially for a martensitic stainless steel. No preheating required.
• Post weld tempering recommended
• Good wet abrasion resistance

EN 1.4418 stainless grade is designed to achieve a good balance of corrosion resistant and mechanical properties.

The chromium and molybdenum provides corrosion resistance.

The low carbon and increased nickel content provides a high strength martensitic structure but with good toughness.

There are also significant amounts of austenite and ferrite in the steel.

This structure also gives a much improved weldability compared to normal higher carbon martensitic grades.

It is proving to be a replacement for stainless grade 431 (1.4057, X17CrNi16-2) in some applications.

Applications which illustrate these features include:

Mining, cement plants, hydrofoil legs, anti-seismic applications, helicopter landing grids, penstocks, hydroelectric

turbine blades, hardboard and chipboard press plate, propeller shafting, pulp and paper.

For Details, please Contact

WUXI GUANGLU Special Steel Co., Ltd.

Stainless martensitic • precipitation hardening steel • stainless ferritic — Our answer to your needs

Tel: +86 510 81812873

Email: export@guanglusteel.com