Home Companies Shenzhen Shanhai Technology Ltd.

10 Hz MediaTek MT 3329 GPS Module with Antenna

Active Member

Contact Us

Address: Room 620 ,yutian building , song lin road , Futian district ,Shenzhen , China

Contact name:

Shenzhen Shanhai Technology Ltd.

10 Hz MediaTek MT 3329 GPS Module with Antenna

City & Province shenzhen guangdong

Product Details

10 Hz MediaTek MT 329 GPS Module With Antenna 

The state-of-the-art 66 channels MediaTek MT3329 GPS Engine.

High sensitivity: Up to -165dBm tracking, superior urban performance.

USB/ UART/ RS232 Interface.

Build-in patch antenna for optimal sensitivity.

DGPS(WAAS, EGNOS, MSAS) support (optional by firmware).

Maximum update rate : up to 10Hz (optional by firmware).

RoHS compliant.

Note that the new MediaTek has custom and exclusive firmware that allows the unit to output an efficient and very compressed binary protocol (This firmware will only work with this kinds of modules!). You can still change between NMEA and Binary protocol with standard MTK messages, and switch the refresh rate between 1hz to 10hz, or set any standard serial baud rate (by default is set to 38400 bps and custom binary protocol).

Arduino example for decoding the custom binary protocol is provided. Remember to install the library folder "GPS_MTK" inside the Arduino IDE "libraries" folder "arduino-00XXlibraries". For the most updated code, please go to this page.

Once there, download the most recent "ArduPlane X.XX.zip" file; open the "libraries" folder and then "AP_GPS" where you'll find the most recent code.
 

 



Features :

1,Support fast TTFF function.

2,Based on MediaTek Single Chip Architecture.

3,Dimension:16mm x 16mm x 6mm.

4,L1 Frequency, C/A code, 66 channels.

5,High Sensitivity:Up to -165dBm tracking, superior urban performances.

6,Position Accuracy:< 3m CEP (50%) without SA (horizontal).

7,Cold Start is under 35 seconds (Typical).

8,Warm Start is under 34 seconds (Typical).

9,Hot Start is under 1 second (Typical).

10,Low Power Consumption:48mA @ acquisition, 37mA @ tracking.

11,Low shut-down current consumption:15uA, typical.

12,DGPS(WAAS, EGNOS, MSAS) support (optional by firmware).

13,Support USB/ UART/ RS232 Interface.

14,Support AGPS function (Offline mode : EPO valid up to 14 days).

15,Includes a molex cable adapter, 5 cm!! (EM-406/uBlox Adapter cable).

16,Includes the new basic adapter!! (Mediatek Adapter Basic).

17,Weight: 8 g.

18,Size: 3.5cm*1.7cm.


Hot Products

Low power Stackable Bluetooth Shield V2.1 This Bluetooth shield is a serial port Bluetooth module ...
Wrobot Digital Button Switch Kit Digital Button Switch Kit include four Digital Button Switches : ...
315 MHz RF Module Kit This 315MHz RF Module Kit including one 315MHz RF Receiver Module and one ...
SPI WiFi Shield Module Arduino Compatible Getting you Arduino into WiFi network is not a fresh news ...
Adjustable Breadboard Power Supply V2.0 Adjustable Breadboard Power Supply V2.0 can directly takes ...
Stackable Bluetooth Shield V2.1 with compatible IFAT - 32, Leaf Maple Arduino Stackable Bluetooth ...