Electronic GPS Vehicle Speed Limiter With Ethiopia Standard Bluetooth Printer

Electronic GPS Vehicle Speed limiter with Ethiopia Standard Bluetooth Printer

1 Product Specifications

2. Speed Limiter General Requirements

Electronic GPS Vehicle Speed limiter with Ethiopia Standard Bluetooth Printer

1. Speed limiter devices shall be calibrated and maintained in a good working order; and capable to limit the speed of a vehicle at the set speed as stipulated by the regulatory body;
2. The speed limiter device systems shall be "failsafe" in such a way that if the plug/s to the electronic controller is/are removed, power is disconnected or if the speed signal and/or wire is disconnected the vehicle shall automatically, default to a limp mode or the engine shall stall or return to idle or, at least, and thus shall not be able to be driven in excess of thirty kilometers per hour. (30km/h);
3. The speed limiter function or road speed limiter shall be EMCcompatible or shall have Anti-Jammer mechanism;
4. Speed limiter device shall be so designed, constructed and assembled and fitted to the vehicle to make it maximum tamper proof and fail safe, against various factors such as disconnection / failure of various components e.g. power supply, speed sensor, mechanical actuator system, linkages etc. or any unauthorized modification and adjustment to the system;
5. The road speed limiter device shall allow normal acceleration and full engine power up to the set maximum speed limit when the limitation function comes to play;
6. The speed limiter device system shall be able to be verified. Authenticated and tested whilst the vehicle is "on" the road.
7. The speed limiter function shall be obtained once the vehicle speed reaches the set maximum speed regardless of the position action on the accelerator a driver may apply.