Active Member
|
[China]
Address: Add:No. 7139 ,Middle of Zheng yang Road,Zhou cun Development Zone , Zibo City, Shangdong Province, China
Contact name:Clara
Grand Industrial Co., Ltd |
|
|
FRP sun sheets 1) Max. width: 700mm- 980mm 2) Thickness: 0.8mm-2.5mm
| 1. | Product name: | FRP, PC, PVC, UPVC, sun sheets |
| 2. | Effective cover width: | 750mm-1050mm |
| 3. | Thickness: | 0.80 mm , 1.0 mm , 1.2 mm , 1.5 mm , 2.0 mm |
| 4. | Color : | clear,translucent,transparent |
| 5. | round wave, trapezoidal wave | |
| 6. | Length : | 1-11.8 m according to the container. |
| 7. | Weight : | 1.1kg / m 2 for 1.0mm*1000mm |
| 8. | Material: | resin and calcium carbonate |
| 9. | Certification: | ISO9001:2000 |
| 10. | Surface type: | common printing/oil printing/transfer printing |
| 11. | PVC ratio: | 40%-60% or according to your requirement |
| 12. | Temperature range: | -40 °C-50°C |
| 13. | Oxygen index: | >32.6 kg/m |
| 14. | Thermal conductivity: | 0.16 W/m°C |
| 15. | Fire rating: | B 1 grade. |
| 16. | HS code: | 3925900000 |
| 17. | Features |
|
| 18. | PVC | Low thermal conductivity good corrosion resistance easy to manufacture, but in high temperature easy to transfigure, low intensity |
| 19 | FRP | Excellent corrosion resistance, good insulation and security. FRP section is the best building material now. |
China Artisan FRP SunSheet Physical and Chemical Data Sheets:
1 | Tensile Strength | 100Mpa |
2 | Tensile Module | 3700Mpa |
3 | Flexural Strength | 190Mpa |
4 | Flexural Strength | 4000Mpa |
5 | Barcloe Hardness | 40gm/cm3-45gm/cm3 |
6 | Fiberglass | 27.50% |
7 | Polyester Resin | 72.5% |
8 | Fire Retardant Co-efficient | 27.10% |
9 | Thermal Conductivity | 0.6w/mk |
10 | Heat Resistant Temperature | -50°C to 130°C |
11 | Anti Ultraviolet Rate | 98%-100% |
12 | Thermal expansion co-efficient | 2.75X10`5cm/cm degree |
13 | Viscosity | 250-350cps |
14 | Solid Content | 58.2-67.4 |
15 | Unit Weight | 2.4kg/m |
16 | Tensile Elongation at break | ≥2.5% |
17 | H.D.T | 75°C |
18 | Light transmission | ≥80% |
China Artisan FRP Sun Sheet More Pictures:
1.Corrosion Resistance 2.Strong Strength 3.Aging Resistance
4.Chalking Resistance 5.Self-cleaning 6.Yellowish Resistance
7.Cheaper Maintenance 8.Excellent Performance
Industrial
Agricultural
Domestic
Holes for fixing should drilled and not punched and should be 2mm larger in diameter than the fixing accessories.
Roofing bolts and nuts.Self-tapping screw with sealing rings and washers.
Washers minimum 32mm should be incorporated with the above fixings,complete with suitable sealing rings or washers.
Where sheets with corrugations over 25mm depth are fixed through the crowns to intermediate purlins.Shaped packing pieces should be located between the crown of the sheet and the support.
This should allow the fixing to tightened sufficiently without distance the profile of the sheet.
Fixing should not be located less than 50mm from the ends of sheets.
2.Side laps:
All side laps should be stitch (seam)bolted at maximum 300mm(12in)centers for roof pitches below 10 and maximum 375mm(15in) centers for roof pitches 10 and over.
In vertical cladding applications all side laps should be stitch(seam) bolted at maximum 450mm(18in) cenetrs.
3.End laps:
Minimum end laps,if unsealed,should be as follow:-
Below 15o roof pitch–not recommended .
Over 15o roof pitch–300(12in) lap.
Over 22,1/2o roof pitch-150mm(6 in) lap.
Where sealed end laps are used a minimum 150mm(6 in) lap is sufficient.
It is recommended that sheets should not overhang supports at eaves by more than 230mm.
4.Sealing:
Side laps between FRP sheets should always be sealed,using closed cell P.V C. self adhesive type or mastic sealing strip.
Side laps and end laps between FRP and other roofing materials on roof pitches 15o or less should always be sealed using closed cell P. V.C. self –adhesive tape or mastic sealing strip.
On steeper roof pitches ,where FRP Sheet is used in Conjunct ion with other roofing materials, side mend laps Should be sealed to the same specification as for the other materials.
