|
[China]
Trade Verify
Address: 03/03/01, No.366, North Hupan Road, New Tianfu Zone, China(Sichuan) Free Trade Area, Chengdu, China.
Contact name:Jerry
Golead Medical Group Co.,Ltd |
|
Verified Suppliers
|
|
|
In computed tomography (CT), a thin fan of x-rays are continuously projected through the body by an x-ray tube, as the tube moves around the body. Electronic detectors on the opposite side of the tube monitor the x-rays throughout the body, as the number of x-rays that reach the detector changes when the beam passes through different tissues. A computer then calculates the data, and finds the most likely density of any point within the volume of tissue scanned. This is usually determined in terms of Hounsfield units, ranging from -1000 to +3000, with air at -1000, water at 0, and lead at +3000.
Using the data collected, a “attenuation map” is then displayed on a monitor, which is a image of the combination of all the points of attenuation. This “slice” of the portion of the body being scanned is referred to as a "voxel", and is a volume element. The animal is then moved, and the process is repeated. This process allows an entire volume of the body to be scanned without any superimposition of structures, and CT scans are found to have better contrast discrimination than standard radiographs.
Furthermore, contrast media is sometimes used to help characterize lesions and further enhance the contrast between structures. CT scanning has come a long way over the years and many practices are now installing 8-64 slice scanners. Usually, animal patients must be anesthetised during CT scanning, however the period of anesthesia is short and the information derived is valuable.
Not only are CT scans used to detect structural changes deep within the body, such as tumors or abscesses, but they’re also used to evaluate dynamic physiologic processes like blood flow and cardic function. Extensive knowledge, experience and training are all vital in becoming a proficient CT scanner, as they are needed to ascertain structures in any plane and to evaluate changes within the anatomy or physiology. Technologists need to be specifically trained and experienced in order to produce the best Ct scanning images possible.
| Power requirements | Input voltage | Single phase AC220V |
| Supply frequency | 50Hz | |
| Power capacity | Not less than 3.5 kVA | |
| Mechanical capacity | Bed size | Length, width and height: 1850mm×550mm×730mm, deviation±5% |
| Scanning frame size | Length, width and height: 1670mm×810mm×1600mm, deviation±5% | |
| Bed surface translation range | 0～800mm deviation±5% | |
| Bed lifting range | 0～150mm deviation±5% | |
| Bearing | 50kg | |
| Electric power | Maximum pulse fluoroscopic output electrical power | 1.875kW(15mA,125kV,10s) |
| Maximum continuous fluoroscopic output electrical power | 1.5kW(12mA,125kV,20s) | |
| Standard pulse fluoroscopy output electrical power | 1.6kW(16mA,100kV,10s) | |
| Maximum continuous fluoroscopic output electrical power | 1.4kW(14mA,100kV,20s) | |
| Loading factors and control | Tube voltage/kV | 50kV～125kV, adjust as per levels, adjustable steps of 1kV, deviation ≤±10% |
| Tube current/mA | 1mA～16mA, adjust as per levels, adjustable steps of 1mA, accuracy conforms to ±1mA | |
| Loading time/ms | 24s, based on external trigger loading time | |
| Imaging performance | Imaging size | 307.2mm×245.7mm |
| Spatial resolution | ≥1.7lp/mm | |
| Imaging time | ≤40s | |
| Working environment requirements | Ambient temperature | 10℃～40℃ |
| Relative humidity | 30%～75% | |
| Atmospheric pressure | 70kPa～106kPa | |
| Transportation and storage conditions | Ambient temperature | -20℃～55℃ |
| Relative humidity | 30%～93% | |
| Atmospheric pressure | 70kPa～106kPa |
Veterinary medical equipment is essential to the health and well-being of animals. Golead's TC-460 Veterinary Medical Equipment is designed to provide veterinarians with the necessary technology to accurately diagnose and treat animals. This veterinary CT scanner is equipped with a 1670mm×810mm×1600mm scanning frame size and a white color, making it a sturdy and attractive piece of medical equipment. It is CE certified and can be purchased in minimum order quantities of 1 unit, with 100 units available per month. It is packaged in wooden boxes for safe delivery and payment can be made via T/T.
The TC-460 Veterinary Medical Equipment is perfect for veterinary CBCT scanning, giving veterinarians a tool to diagnose and treat animals efficiently. This veterinary medical equipment is reliable and provides quality scans, allowing for accurate diagnosis and treatment of animals. Golead's TC-460 Veterinary Medical Equipment is the perfect choice for veterinarians looking for a quality, reliable medical equipment for animal diagnosis and treatment.
We offer comprehensive technical support and service for our Veterinary Medical Equipment products. Our team of experienced engineers is available to help with installation, maintenance, and troubleshooting. We provide ongoing help and support to ensure that our products perform optimally and meet customer expectations. We also offer training sessions on product use and best practices to ensure safe and effective operation.
Veterinary medical equipment requires special care when being packaged and shipped. It is important to ensure that the product remains secure and in good condition during transit.
