XHL-800-2 Automatic LED drive power supply Potting Machine

Introduction: automatic glue pouring machine for module, easy to clean. The mixing pipe of A and B glue mixing part only has the glue outlet, so the cleaning part only has the mixing pipe, and the other parts do not need to be cleaned. If you need to stop for A period of time after work or glue pouring, you just need to press the automatic cleaning button to clean the mixing pipe, and the consumables only have the mixing pipe

Scope of application:

Display module, LED drive power supply, capacitor, lightning protector, electronic industry product filling

Operating principle:

1. Program editing: just input the product's line spacing, number of lines, length of each line, number of rows of modules, and number of lamp cups in each row.

2. Program call: store the edited program and call out similar products.

3. Gluing method: gluing head movement, pump body (driven by stepping motor) gluing

4, trajectory: straight line, curve, point, box, circle, W type,S type, can walk arbitrary irregular trajectory.

5, z-axis up and down movement using ball shaft screw rapid response.

6, glue machine automatic ratio

Glue pouring speed:

1. Operation speed of pouring head: 0-600mm/s

2. Machine journey: 800*800*100mm

3. Glue feeding speed: 0.5-20/s

Equipment 　Configurations

1. Control System : Xinjie PLC+ motion control card +7.2 "kunlun tongstate touch screen

2.Software System :Independent research and development

3.Motion Motor:Panasonic servo motor

4.Measuring pump:Taiwan Precision Adjustment wear-resisting

5.Cut-off system:Independent research and development

6.Mixting device:Independent research and development

7.Stirring motor:Tai Wan OUTAI

8.Rack Material :Steel

9.Slide device: Taiwan Hiwin + Screw rod

10.Mixing head cleaning:Gas-liquid cleaning

11.Flow measurement :Visual Flowmeter

Equipment Function

1.English Operation Interface:Anti-dumbing-type operation program design, simple operation, practical, ordinary workers can learn in 5 minutes

You know all the methods

2. High-end imported electronic control system: Main electrical wiring, dust, anti - static, are up to foreign standards

Relay omron.

Adopt sinjie PLC

3.Glue quantity detection and feedback function The flow detection instrument controls the output of glue B.

AB glue flow alarm detection function

The glue drum is equipped with the function of low liquid level alarm

4.Double protection with glue filtration:Filter protection measures, reduce the mechanical pump failure probability, prevent the impurities in the glue into the glue pipe

5.Barrel :A material barrel with stirring device to prevent precipitation, B rubber barrel sealing good to prevent volatilization

6.The equipment runs more smoothly:The overall frame is made of super thick and stable material, which can effectively solve the shaking of the machine body when the machine moves at high speed and improve the production stability and precision

7.High precision mechanical pump body: Precision adjustment wear resistant

8.Fully automatic mechanical stirring:The mixing speed of AB glue can be adjusted from 0 to 3000rpm by dynamic and mechanical stirring

9.Slide device Adopt Taiwan HIWIN slide rail and screw rod

Module potting machie parameter

1. Glue Ratio:10:1 to 5:1

2. Stirring Method:Dynamic stirring

3. Machine route:800*800*100mm

4.Work table:1150*1000*30MM(accurate grinding steel board)

5.Programming method:Teaching programming

6.Application:Screen module,LED power, capacitor, anti-thunder, electron industry

7.Package size:1320*1150*1500MM

8.Pump A:Piston pump

9.Pump B:Piston pump

10.Glue barrel volum:A:25L,B:10L

11.Squeeze glue volum:2-10g/s

12.Squeeze glue nozzle:Standard with one glue nozzle, (and match another nozzle depending on the goods size )

13.Input air pressure:0.5-0.7Mpa

14.Machine power:1000W

15.Service voltage:AC220V±10%,50HZ

Machine Feature

1. Accurate positioning, high precision and small operation error: adopt high-precision sliding track and high-precision balancing device.

2.powerful electric control system: the use of imported original motor, panasonic PLC, touch screen, electronic components, wiring, dust, anti-static system are designed in accordance with national standards.

3.glue preparation: high precision gear pump, give full play to its advantages, large amount of glue supply, high proportion of glue ratio of a new technological breakthrough.

4. Glue level alarm function of A and B: it can prevent glue breaking in time.

5. Original timing glue discharging system: prevent the temporary stop of glue pouring during shift change and rest. After the glue operation time, the glue curing of the mixing system will result in infinite delay of operation time.

6. Glue quantity monitor of B glue curing agent: prevent the dry glue problem caused by B glue breaking.

7. Multiple filtration system: multiple filtration is adopted from the rubber barrel to the rubber head to prevent impurities from entering the rubber barrel and causing pump jam.

8. Heating device can be added, equipped with glue A stirring equipment to prevent precipitation.

9. Automatic cleaning system: the machine adopts the method of liquid separation and packaging, only mixing at the glue outlet head, automatic cleaning after use, quick and convenient operation.

10. Integrated design of glue dispensing and pouring, with automatic operation.

11. Easy to operate, can store 10 sets of parameters, call out product parameters during production, press the start button.

The glue suitable for double-liquid glue pouring machine:

Suitable for all kinds of two-component glue, such as double-liquid glue, AB glue, silica gel, epoxy resin, PU glue and so on.

The glue suitable for double-liquid glue potting machine:

Suitable for all kinds of two-component glue, such as double-liquid glue, AB glue, silica gel, epoxy resin, PU glue and so on